Brother DCP-B7620DW Podręcznik bezpieczeństwa produktu - Strona 15
Przeglądaj online lub pobierz pdf Podręcznik bezpieczeństwa produktu dla Drukarka Brother DCP-B7620DW. Brother DCP-B7620DW 19 stron.
Również dla Brother DCP-B7620DW: Podręcznik szybkiej konfiguracji (2 strony), Podręcznik szybkiej konfiguracji (2 strony), Podręcznik bezpieczeństwa produktu (19 strony)
Drukuj stronę
11. This equipment may not provide for the effective hand-over of a call to another device
connected to the same line.
12. This unit will only work in conjunction with a tone signalling (DTMF) telephone, but some
telephones may not be compatible. Since noise or speech from the telephone can upset
dialling from this unit, errors may result if the devices are used together in other than quiet
conditions.
13. Where it is necessary to dial prefix digits, such as a Caller Display override code ("0196" or
"0197"), this unit will have to be used in conjunction with an associated tone signalling
(DTMF) telephone.
14. Note that some telephones are NOT compatible with this unit and dialling errors may result if
the two devices are used together in other than quiet conditions. The Telecom Faults Service
is NOT to be called should such problems arise. In such cases, it is recommended that the
prefix and wanted number are dialled manually.
15. The answer delay setting of this equipment shall not be set to less than the default setting as
this will destroy Caller ID information.
16. The caller ID telephone numbers which are displayed and stored in this equipment include
the caller's area code or cellular code but do not include the toll access "0" prefix. When
calling back it is necessary to add a "0" to the telephone number, or if the telephone number
is a local number, omit the area code digit. If the toll services of a service provider other than
Telecom are being used then a toll charge may be incurred if the "0" prefix toll access code
and area code are used.
17. When using the Caller Line Identification incorporated in this device, verify the integrity of the
recorded digits prior to dialling.
For WLAN models (Taiwan only)
Caution!
Without permission granted by the NCC, any company, enterprise, or user is not allowed to
change frequency, enhance transmitting power or alter original characteristic as well as
performance to a approved low power radio-frequency devices. The low power radio-frequency
devices shall not influence aircraft security and interfere legal communications; If found, the user
shall cease operating immediately until no interference is achieved. The said legal
communications means radio communications is operated in compliance with the
Telecommunications Management Act. The low power radio-frequency devices must be
susceptible with the interference from legal communications or ISM radio wave radiated devices.
Avoid affecting the operation of nearby radar systems.
Compliance Statement of Wireless equipment (Thailand only)
เครื ่ อ งโทรคมนาคมและอุ ป กรณ์ น ี ้ มี ค วามสอดคล้ อ งตามมาตรฐานหรื อ ข้ อ กํ า หนดทางเทคนิ ค ของ กสทช.
This telecommunication equipment conforms to the standard or technical requirements of
NBTC.
เครื ่ อ งวิ ท ยุ ค มนาคมนี ้ ม ี ร ะดั บ การแผ่ ค ลื ่ น แม่ เ หล็ ก ไฟฟ้ า สอดคล้ อ งตาม มาตรฐานความปลอดภั ย ต่ อ สุ ข ภาพของมนุ ษ ย์ จ ากการใช้ เ ครื ่ อ งวิ ท ยุ ค มนาคมที ่ ค ณะ
กรรมการกิ จ การ โทรคมนาคมแห่ ง ชาติ ป ระกาศกํ า หนด
This radiocommunication equipment has the electromagnetic field strength in compliance with
the Safety Standard for the Use of Radiocommunication Equipment on Human Health
announced by the National Telecommunications Commission.
15