Brother DCP-J1200W Podręcznik szybkiej konfiguracji

Przeglądaj online lub pobierz pdf Podręcznik szybkiej konfiguracji dla Drukarka Brother DCP-J1200W. Brother DCP-J1200W 2 stron.
Również dla Brother DCP-J1200W: Podręcznik szybkiej konfiguracji (2 strony), Podręcznik szybkiej konfiguracji (2 strony), Podręcznik szybkiej konfiguracji (2 strony)

Drukuj stronę

DCP-J1200W

You must complete steps

Unpack the machine and check the components

Remove the protective tape or ﬁlm covering the machine and the supplies.

* Use these inbox ink cartridges

for the initial installation.

Load plain A4 paper in the paper tray

Pull the paper tray completely

out of the machine, and then

open the output paper tray cover.

Connect the power cord and install the inbox ink cartridges

Connect the power cord.

Check the print quality

The machine prints the Print Quality Check

Sheet.

Connect your computer or mobile device to your machine

Follow these steps to complete the setup using one of the connection types available on your machine.

Visit

setup.brother.com

to download and install Brother

software.

setup.brother.com

Quick Setup Guide

Read the Product Safety Guide ﬁrst, then read this guide for the correct installation procedure.

Brother recommends keeping this guide next to your Brother machine for quick reference.

Video setup instructions:

support.brother.com/videos

to be able to use this machine.

Fan the paper well and load it in

the tray.

Open the ink cartridge cover.

Check the print quality of the four colour blocks on the

sheet.

Follow the on-screen instructions and

prompts.

NOTE

For USB Connection, locate the USB port inside

the machine as shown.

The latest manuals are available at the Brother support website:

support.brother.com/manuals

NOTE

• The components included in the box may differ depending on your country.

• Save all packing materials and the box in case you must ship your machine.

• You must purchase the correct interface cable for the interface you want to use.

We recommend using a USB 2.0 cable (Type A/B) that is no more than 2 metres long.

• Brother aims to reduce waste and save the raw materials and energy required for their

production. Read more about our environmental work at www.brotherearth.com.

For more information about paper handling and sizes, see the Online User's Guide

at support.brother.com/manuals.

Adjust the paper guides.

Unpack and install the inbox ink

cartridges.

If the quality of any of the four colour blocks is Poor (see the image on the

left), we strongly recommend cleaning the print head to improve the print

Poor

quality.

See the Improve Print Quality section in this guide.

NOTE

To change the language of the sheet, see the Online User's Guide at

support.brother.com/manuals.

Close the output paper tray

Pull out the paper support a, and

cover, and then slowly push the

unfold the paper support flap b so

paper tray completely into the

that the printed pages do not fall.

machine.

Close the ink cartridge cover. The machine will prepare the ink tube

system for printing.

Wait until the machine prints the Print Quality Check Sheet and go to

NOTE

The first time you install a set of ink cartridges, the machine will use

an amount of ink to fill the ink delivery tubes for high-quality printouts.

This process will only happen once.

Setup Finished

You can now print and scan using your machine.

To check for the latest firmware, visit

support.brother.com/up7.

Important Notice for Network Security:

The default password to manage this machine's settings is

located on the back of the machine and marked "Pwd". We

recommend immediately changing the default password to

protect your machine from unauthorised access.

D01U0L001-00

Version 0