Brother DCP-J774DW Podręcznik szybkiej konfiguracji
Przeglądaj online lub pobierz pdf Podręcznik szybkiej konfiguracji dla Drukarka Brother DCP-J774DW. Brother DCP-J774DW 2 stron. Brief explanations for routine operations
Również dla Brother DCP-J774DW: Podręcznik (31 strony), Podręcznik (19 strony)
DCP-J772DW / DCP-J774DW / MFC-J890DW / MFC-J895DW
Quick Setup Guide
Read the Product Safety Guide first, then read this Quick Setup Guide
for the correct installation procedure.
Unpack the machine and check the components
1
The components included in the box may differ depending on your country.
Remove the protective tape and film covering the machine and the touchscreen.
Inbox Ink Cartridges*
• Black
• Yellow
• Cyan
• Magenta
*Ink cartridges contain
approximately the same page
yield as replacement cartridges
Watch our FAQ videos for help
(Standard).
with setting up your Brother
uu Reference Guide: Supply
machine.
support.brother.com/videos
2
Load paper in the paper tray
For loading other sizes of paper, see Paper Handling in the Reference Guide.
Pull the paper tray completely
out of the machine.
3
Connect the power cord
(Example for UK)
Connect the power cord. The machine will power
on automatically.
NOTE
You can adjust the control panel angle to read the
touchscreen more easily.
6
Install the inbox ink cartridges
Open the ink cartridge cover, and then
remove the orange protective part
from the machine.
NOTE
Do not throw away the orange protective part.
You will need it if you transport the machine.
Select your language
8
(if needed and only for
certain models)
1.
Press
[Settings] > [All Settings] >
[Initial Setup] > [Local Language].
2.
Press your language.
3.
Press
.
Quick Setup Guide
Reference Guide
Product Safety Guide
Brother Installation Disc
Specifications
Open the output paper tray
cover a.
Fan the paper well and load it in the tray.
Select your country
4
or language
(Initial setup only)
After turning the machine on, you may need to set your
country or language (depending on your machine).
If required, follow the touchscreen instructions.
Follow the touchscreen
instructions to unpack and install
the ink cartridges.
The machine will prepare the ink
tube system for printing.
9
Connect the telephone line cord (MFC models only)
If you are not using your machine as a fax, go to
Connect the telephone line cord.
Use the socket marked LINE.
The latest manuals are available at the Brother Solutions Center:
support.brother.com/manuals
Power Cord
(for UK)
(for others)
Telephone Line Cord
(MFC models only)
Close the output paper tray cover, and
Adjust the paper guides.
then slowly push the tray completely
into the machine.
Quickly shake just the black
ink cartridge horizontally
15 times as shown, before
inserting it into the machine.
10
.
NOTE
If you are sharing one telephone line with an external
telephone, connect it as shown below.
NOTE
• Most of the illustrations in this Quick Setup Guide show the
MFC-J890DW.
• Save all packing materials and the box in case for any reason you
must ship your machine.
• You must purchase the correct interface cable for the
interface you want to use. A USB cable is included with
some models.
USB cable
We recommend using a USB 2.0 cable (Type A/B) that is no more
than 2 metres long.
Ethernet (Network) cable (MFC-J890DW/J895DW only)
Use a straight-through Category5 (or greater) twisted-pair cable
for 10BASE-T or 100BASE-TX Fast Ethernet Network.
NOTE
Pull out the paper support a, and unfold
the paper support flap b so that the
printed pages do not fall.
5
Set the date and time
Follow the touchscreen instructions to set the date and
time.
7
Machine settings
When the machine has finished the initial cleaning
process, follow the touchscreen instructions to
configure the machine's settings.
• Check print quality
• Set Brother LCD Message defaults
• Print the installation sheet
a. Extension telephone
b. External telephone
D00S18001-00
UK
Version 0