AEG 949 601 506 Instrukcja obsługi - Strona 25

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Hob AEG 949 601 506. AEG 949 601 506 33 stron.

To optimise joints between the installed hobs, the gap between the ceramic hob

may be grouted with silicone:

1. Remove the aluminium panels from the hobs.

2. Apply a stripe of silicone to the gap between the two ceramic hob. Use only

the silicone supplied, as it is designed to tolerate the appliance's high temper-

ature. (Fig. 1)

3. Splash a little soapy water (washing-up liquid) on the silicone stripe

4. Press the rubber block hard against the ceramic hob and pull it slowly from

back to front (Fig. 2)

5. Leave the silicone to harden until the next day.

6. Remove surplus silicone coating from the ceramic hob with the razorblade

supplied. Be careful not to damage the silicone in the gap. Run tools only

along the joint, never across it.

7. Polish the ceramic hob with the supplied cleaning product for ceramic hobs.