Brother DCP120C - Flatbed Multifunction Photo Capture Center Skrócona instrukcja obsługi - Strona 20

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Drukarka Brother DCP120C - Flatbed Multifunction Photo Capture Center. Brother DCP120C - Flatbed Multifunction Photo Capture Center 33 stron. Quick setup guide - french
Również dla Brother DCP120C - Flatbed Multifunction Photo Capture Center: Podręcznik szybkiej konfiguracji (24 strony), Lista referencyjna części (30 strony), Podręcznik szybkiej konfiguracji (33 strony), (Francuski) Przewodnik szybkiej instalacji (24 strony)

Drukuj stronę

Brother DCP120C - Flatbed Multifunction Photo Capture Center Skrócona instrukcja obsługi

STEP2

Installing the Driver & Software

For USB Interface Users

For Mac OS

Important

Make sure that you have finished the

instructions from Step 1 Setting Up the

Machine on page 4-9.

Note

For Mac OS

Mac OS

X 10.2.4 or greater. (For the latest

information for Mac OS

http://solutions.brother.com)

Disconnect the machine from the power socket

and from your computer, if you already

connected an interface cable.

Turn on your Macintosh

Put the supplied CD-ROM into your CD-ROM

drive.

Double-click the Start Here OSX icon to install

the drivers and MFL-Pro Suite. If the language

screen appears, choose your language.

Click MFL-Pro Suite to install.

X 10.2.4 or greater

X 10.2.0 to 10.2.3 users, upgrade to

X, visit

Follow the on-screen instructions, and restart

your Macintosh

Lift the scanner cover to its open position.

After the DeviceSelector window appears

connect the USB interface cable to your

Macintosh and then to the machine.

Note

The DeviceSelector window will not appear if you

have connected a USB interface cable to the

machine before restarting your Macintosh

you are overwriting a previously installed version

of the Brother Software. If you encounter this

problem continue with the installation but skip 13.

You should choose your Brother machine from the

Model pop-up menu in the main screen of

ControlCenter2. For details, see the Software

User's Guide on CD-ROM.

Connect the USB cable to the USB socket

marked with a

USB socket above and to the left of the ink

cartridge slots, as shown below.

Macintosh

or if

symbol. You will find the