AEG CCE84751FB Podręcznik użytkownika - Strona 5
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Hob AEG CCE84751FB. AEG CCE84751FB 28 stron.
Drukuj stronę
When the appliance operates with other appliances
•
the maximum vacuum generated in the room should
not exceed 0.04 mbar.
Clean the hood filter regularly and remove grease
•
deposits from the appliance to prevent the risk of fire.
If the supply cord is damaged, it must be replaced by
•
the manufacturer, an authorized Service or similarly
qualified persons in order to avoid a hazard.
If the appliance is connected directly to the power
•
supply, the electrical installation must be equipped
with an isolating device that allows to disconnect the
appliance from the mains at all poles. Complete
disconnection must comply with conditions specified in
the overvoltage category III. The means for
disconnection must be incorporated in the fixed wiring
in accordance with the wiring rules.
WARNING: Use only hob guards designed by the
•
manufacturer of the cooking appliance or indicated by
the manufacturer of the appliance in the instructions
for use as suitable or hob guards incorporated in the
appliance. The use of inappropriate guards can cause
accidents.
2. SAFETY INSTRUCTIONS
2.1 Installation
WARNING!
Only a qualified person must
install this appliance.
WARNING!
Risk of injury or damage to
the appliance.
• Remove all the packaging.
• Do not install or use a damaged
appliance.
• Follow the installation instructions
supplied with the appliance.
• Keep the minimum distance from
other appliances and units.
• Always take care when moving the
appliance as it is heavy. Always use
safety gloves and enclosed footwear.
• Seal the cut surfaces with a sealant to
prevent moisture from causing
swelling.
• Protect the bottom of the appliance
from steam and moisture.
• Do not install the appliance next to a
door or under a window. This
prevents hot cookware from falling
from the appliance when the door or
the window is opened.
• Do not install the exhaust air into a
wall cavity, unless the cavity is
designed for that purpose.
• For ductless installation, the fan outlet
must be positioned directly against
the wall or must be separated by an
additional cabinet wall, in order to
prevent access to the fan blades.
• Each appliance has cooling fans on
the bottom.
ENGLISH
5