Brother HL-1240 Instrukcja obsługi - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Drukarka Brother HL-1240. Brother HL-1240 12 stron. Imprimante laser
Również dla Brother HL-1240: Instrukcje techniczne (4 strony), Podręcznik szybkiej konfiguracji (16 strony), Lista referencyjna części (25 strony), Instrukcja serwisowa (8 strony), Podręcznik szybkiej konfiguracji (16 strony), (Francuski) Podręcznik szybkiej konfiguracji (16 strony)

Drukuj stronę

UNINET IMAGING INC. • BROTHER HL 1240/165 (TN 430/460) CARTRIDGE REMANUFACTURING INSTRUCTIONS

1. With the use of small flat blade screwdriver, slightly pry up the

white plastic alignment hub located from the non-gear side of

the developer roller and remove it.

3. On the same side and with the help of a small jeweler screw-

driver release the three (3) clips holding the developer roller

bearing cap to the toner hopper. The first clip is right below the

screw holding the developer blade, the opposite clip is between

the side of the roll and the casing while the third one is accessi-

ble from outside the casing.

11124 Washington Blvd., Culver City, California USA 90232 • Ph +1 310 280 9620 • Fx +1 310 280 0533 • [email protected]

© 2007 UniNet Imaging Inc. All Trademark names are property of their respective owners. Product brand names mentioned are intended to show compatibility only. UniNet Imaging does not guarantee or warrant downloaded information.

w w w.

u n i n e t

2. NOTE: Be aware of the pressure spring behind the white plas-

tic hub and do not lose it.

NOTES

i m a g i n g . c o m / t e c h n i c a l . a s p