LG - Instrukcja serwisowa - Strona 13

¡ Deflection Data Adjustment (Line SVC-1)

NOTE: To enter SVC mode, press "OK" buttons on both TV set

and the Remote control at the same time.

1. Preparation for Deflection Adjustment

1) At SVC mode, press the Yellow colored button.

And then, deflection data adjustment OSD (SVC1 mode) will

be displayed.

2) Tune the TV set to receive a PAL 05 CH.

2. Deflection Initial Setup Data

Status

Default

3. Deflection Adjustment Procedure

VL (Vertical Linearity)

Adjust so that the boundary line between upper and lower half

is in accord with geometric horizontal center of the CPT.

VA (Vertical Amplitude)

Adjust so that the circle of a digital circle pattern may be

located within the effective screen of the CPT.

SC (Vertical "S" Correction)

Adjust so that all distance between each horizontal lines are

to be the same.

VS (Vertical Shift)

Adjust so that the horizontal center line of a digital circle

pattern is in accord with geometric horizontal center of the

CPT.

HS (Horizontal Shift)

Adjust so that the vertical center line of a digital circle pattern is

in accord with geometric vertical center of the CPT.

Press the OK(¡Æ ) button to memorize the data.

21" FLAT S/S

21" FLAT LG

- 13 -