LG 20MK430H Instrukcja obsługi - Strona 21

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Monitor LG 20MK430H. LG 20MK430H 31 stron. Led lcd computer monitor
Również dla LG 20MK430H: Instrukcja łatwej konfiguracji (6 strony), Instrukcja obsługi (29 strony), Instrukcja łatwej konfiguracji (6 strony)

Drukuj stronę

TROUBLESHOOTING

Check the following before calling for service.

No image appears

Is the power cord of the display

connected?

Do you see an "Out of Range" message

on the screen?

Do you see a "NO SIGNAL" message on

the screen or black screen?

Can't you control some functions in OSD?

Can't you select some menu in

OSD?

CAUTION

Check Control Panel ► Display ► Settings and see if the frequency or the resolution were changed. If yes,

readjust the video card to the recommend resolution.

If the recommended resolution (optimal resolution) is not selected, letters may be blurred and the screen may be

dimmed, truncated or biased. Make sure to select the recommend resolution.

The setting method can differ by computer and O/S (Operation System), and resolution mentioned above may

not be supported by the video card performance. In this case, please ask to the computer or the video card

manufacturer.

Keep proper posture when using the monitor, otherwise the screen may not be optimized.

Display image is incorrect

The screen color is mono or abnormal.

The screen blinks.

Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message?

Have you installed the display driver?

The screen is flickering.

Did you select the recommended

resolution?

y Check and see if the power cord is connected properly to the power outlet.

y This message appears when the signal from the PC (video card) is out of

horizontal or vertical frequency range of the display. See the 'Specifications'

section of this manual and configure your display again.

y After the monitor is on "NO SIGNAL", the monitor goes to DPM mode.

y This is displayed when the signal cable between the PC and the monitor is

missing or disconnected. Check the cable and reconnect it.

y Check PC status.

y You can unlock the OSD controls at any time by entering the OSD lock menu

and changing items to off.

y Check if the signal cable is properly connected and use a screwdriver to fasten if

necessary.

y Make sure the video card is properly inserted in the slot.

y Set the color setting higher than 24 bits (true color) at Control Panel ► Settings.

y Check if the screen is set to interlace mode and if yes, change it to the recommend

resolution.

y Be sure to install the display driver from our web site: http://www.lg.com .

y Make sure to check if the video card supports Plug&Play function.

22MK4 series 24MK4 series 27MK4 series 27MN430H

selected resolution is HDMI 1080i 60/50 Hz, the screen may be flickering. Change the

resolution to the recommended resolution 1080P.

If the