AEG IKE95474XB Podręcznik użytkownika - Strona 21
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Hob AEG IKE95474XB. AEG IKE95474XB 28 stron.
Drukuj stronęProblem
and a number come on.
You can hear a constant
beep noise.
8.2 If you cannot find a
solution...
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre. Give the
data from the rating plate. Give also
three digit letter code for the glass
ceramic (it is in the corner of the glass
9. INSTALLATION
WARNING!
Refer to Safety chapters.
Possible cause
The cookware is unsuitable.
The diameter of the bottom
of the cookware is too small
for the zone.
FlexiBridge operates. One
or more sections of the func-
tion mode which operates
are not covered by the cook-
ware.
PowerSlide operates. Two
pots are placed on the flexi-
ble induction cooking area.
There is an error in the hob.
The electrical connection is
incorrect.
surface) and an error message that
comes on. Make sure, you operated the
hob correctly. If not the servicing by a
service technician or dealer will not be
free of charge, also during the warranty
period. The instructions about the
Service Centre and conditions of
guarantee are in the guarantee booklet.
9.1 Before the installation
Before you install the hob, write down
the information bellow from the rating
plate. The rating plate is on the bottom
of the hob.
Serial number ...........................
ENGLISH
Remedy
Use suitable cookware. Refer
to "Hints and tips".
Use cookware with correct
dimensions. Refer to "Tech-
nical data".
Place the cookware on the
correct number of sections
of the function mode which
operates or change the func-
tion mode. Refer to "Flexi-
ble induction cooking area".
Use only one pot. Refer to
"Flexible induction cooking
area".
Deactivate the hob and acti-
vate it again after 30 sec-
onds. If
comes on again,
disconnect the hob from the
electrical supply. After 30
seconds, connect the hob
again. If the problem contin-
ues, speak to an Authorised
Service Centre.
Disconnect the hob from the
electrical supply. Ask a quali-
fied electrician to check the
installation.
21