AEG 40809 Instrukcje użytkownika - Strona 35

Przeglądaj online lub pobierz pdf Instrukcje użytkownika dla Spryskiwacz AEG 40809. AEG 40809 40 stron.

Installation and connection instructions

Electrical connection

Information about the mains power supply, the

nature of the power and the fuses to be used are

given on the washing machine name plate at the

back of the washing machine.

If the washing machine is directly connected to the electrical installation

(fixed connection), insert a two-pole switch with a contact opening distance

of not less than 3 mm.

This washing machine can only be connected to 230 V single phase power

supply.

Check that the subscriber's meter and fuses are capable of carrying the

current required by the washing machine, allowing for other electrical

equipment connected at the same time.

Rating of line fuses (one for each phase):

10 A in 230 V single phase.

Important

The installation shall comply with with the rules in force.

Use a power outlet with an earthing pin, which shall be connected according

to the rules in force.

If the mains power supply cable has to be replaced, have the work done by

the After Sales Service to make sure that it is done safely.

Make sure that the earthing connector is conform with the rules in force.

We cannot be held responsible if accidents or incidents are caused by a non-

existent or defective earth.