AEG 7000 Series Podręcznik użytkownika - Strona 30

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Spryskiwacz AEG 7000 Series. AEG 7000 Series 49 stron.
Również dla AEG 7000 Series: Podręcznik użytkownika (32 strony), Podręcznik użytkownika (44 strony), Podręcznik użytkownika (32 strony), Podręcznik użytkownika (28 strony), Podręcznik użytkownika (36 strony)

AEG 7000 Series Podręcznik użytkownika
30
www.aeg.com
Always follow the
instructions that you find on
the packaging of the
detergent products, but we
recommend that you do not
exceed the maximum
indicated level (
quantity will however
guarantee the best washing
results.
After a washing cycle, if
necessary, remove any
detergent residue from the
detergent dispenser.
11.4 Check the position of the
detergent flap
1. Pull out the detergent dispenser until
it stops.
2. Press the lever down to remove the
dispenser.
3. To use powder detergent, turn the
flap up.
4. To use liquid detergent, turn the flap
down.
With the flap in the position DOWN:
• Do not use gelatinous or thick
liquid detergents.
5. Measure out the detergent and the
). This
6. Carefully close the detergent
Make sure that the flap does not cause a
blockage when you close the drawer.

11.5 Setting a programme

1. Turn the programme dial to select
The indicator of the Start/Pause button
flashes.
The display shows an indicative
programme duration and the maximum
load.
2. To change the temperature and/or
3. If desired, set one or more options

11.6 Starting a programme

Touch the Start/Pause button to start the
programme. It is not possible to start the
programme when the indicator of the
button is off and doesn't flash (e.g.
programme dial on a wrong position).
• Do not exceed to liquid
detergent dose indicated on the
flap.
• Do not set the prewash phase.
• Do not set the delay start
function.
fabric conditioner.
dispenser.
the desired washing programme.
the spin speed, touch the related
buttons.
by touching the related buttons. The
related indicators illuminate on the
display and the given information
changes accordingly.
If a selection is not possible
an acoustic signal sounds
and the display shows
.