AEG KO-LAVAMAT 88840 Podręcznik użytkownika - Strona 40
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Spryskiwacz AEG KO-LAVAMAT 88840. AEG KO-LAVAMAT 88840 48 stron. Aeg prosteam condenser dryer user manual
Drukuj stronę
40
Installation
3. Pull slightly rack handle (not to the end).
Grasp at it harder and lift it up.
For easiest unpacking turn the rack
upside down
4. Take it carefully out of the drum.
5. Remove from the drum rest of packing
elements.
Electrical connection
Details on mains voltage, type of current and the fuses required should be taken from the
rating plate. The rating plate is fitted near the loading aperture (see "Product description"
chapter).
Connect the machine to an earthed socket, in accordance with current wiring regulations.
WARNING!
The manufacturer declines any responsibility for damage or injury through failure
to comply with the above safety precautions.
Should the appliance power supply cable need to be replaced, this must be carried
out by our Service Centre.
The appliance is supplied with a 13 amp plug fitted. In the event of having to change the
fuse in the plug supplied, a 13 amp ASTA approved BS 1363/A fuse must be used.
The wires in the mains lead are coloured in ac-
cordance with the following code:
1
Blue - Neutral
2
cord clamp
3
Brown - Live
4
Green and Yellow - Earth
The wire coloured green and yellow must be con-
nected to the terminal marked with the letter «E»
or by the earth symbol
yellow.
The wire coloured blue must be connected to the
terminal «N» or coloured black.
The wire coloured brown must be connected to
the terminal marked «L» or coloured red.
Upon completion there must be no cut, or stray strands of wire present and the cord clamp
must be secure over the outer sheath.
WARNING!
A cut off plug inserted into a 13 amp socket is a serious safety (shock) hazard.
Ensure that the cut off plug is disposed of safely.
or coloured green and
3
4
2
4
1
2
3