Fujitsu LifeBook C-6631 Bios Manual - Strona 2

Przeglądaj online lub pobierz pdf Bios Manual dla Laptop Fujitsu LifeBook C-6631. Fujitsu LifeBook C-6631 37 stron. Bios setup utility
Również dla Fujitsu LifeBook C-6631: Instrukcja oprogramowania (39 strony)

Drukuj stronę

L i f e B o o k C S e r i e s B I O S

C Series BIOS

BIOS SETUP UTILITY

The BIOS Setup Utility is a program that sets up the

operating environment for your notebook. Your

BIOS is set at the factory for normal operating condi-

tions, therefore there is no need to set or change the

BIOS environment to operate your notebook.

The BIOS Setup Utility configures:

Device control feature parameters, such as changing

I/O addresses and boot devices.

System Data Security feature parameters, such

as passwords.

Entering the BIOS Setup Utility

To enter the BIOS Setup Utility do the following:

1. Turn on or restart your notebook.

2. Press the [F2] key once the Fujitsu logo appears

on the screen. This will open the main menu

of the BIOS Setup Utility with the current

settings displayed.

3. Press the [RIGHT ARROW] or [LEFT ARROW] key

to scroll through the other setup menus to review or

alter the current settings.

Navigating Through The Setup Utility

The BIOS setup utility consists of seven menus: Main,

Advanced, Security, Power, Boot, Info, and Exit. This

document explains each menu in turn, including all

submenus and setup items.

The following procedures allow you to navigate the

setup utility menus:

1. To select a menu, use the cursor keys:

2. To select a field within a menu or a submenu, use the

cursor keys:

3. To select the different values for each field, press the

[Spacebar] or [+] to change to the next higher selec-

tion and [F5] or [-] to go to the next lower selection.

4. To activate a submenu press the [Enter] key.

5. To return to a menu from a submenu, press

the [Esc] key.

6. To go to the Exit menu from any other menu,

press the [Esc] key.

P O I N T S

Selecting a field causes a help message about that

field to be displayed on the right-hand side of the

screen.

Pressing the Enter key with the highlight on a selec-

tion that is not a submenu or auto selection will

cause a list of all options for that item to be

displayed. Pressing the Enter key again will select

the highlighted choice.

7. Pressing the [F9] key resets all items in the BIOS to

the default values.

8. Pressing the [F10] key saves the current configura-

tion and exits the BIOS Setup Utility. You will be

asked to verify this selection before it is executed.

9. Pressing the [F1] key gives you a general help screen.

Entering the Setup Utility After a Configuration

Change or System Failure

If there has been a change in the system configuration

that does not match the parameter settings stored in

your BIOS memory, or there is a failure in the system,

the system beeps and/or displays an error message after

the Power On Self Test (POST). If the failure is not too

severe, it will give you the opportunity to modify the

settings of the setup utility, as described in the following

steps:

1. When you turn on or restart the computer there is a

beep and/or the following message appears on the

screen:

Error message - please run SETUP

program Press <F1> key to continue,

<F2> to run SETUP

2. If an error message is displayed on the screen, and

you want to continue with the boot process and start

the operating system anyway, press the [F1] key.

P O I N T S

If your notebook emits a series of beeps that sounds

like a code and the display is blank, please refer to the

Troubleshooting Section. The Troubleshooting Section

includes a list of error messages and their meanings.

If your data security settings require it, you may be

asked for a password before the operating system will

be loaded.