Fujitsu LifeBook C-6651 Bios Manual - Strona 7
Przeglądaj online lub pobierz pdf Bios Manual dla Laptop Fujitsu LifeBook C-6651. Fujitsu LifeBook C-6651 37 stron. Bios setup utility
Również dla Fujitsu LifeBook C-6651: Instrukcja oprogramowania (39 strony)
Drukuj stronę
Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu
Menu Field
Options
Maximum
Display only
n
Capacity:
Multi-Sector
Disabled
n
Transfers:
2 Sectors
n
4 Sectors
n
8 Sectors
n
16 Sectors
n
32 Sectors
n
64 Sectors
n
n
128 Sectors
LBA Mode
Disabled
n
Control:
Enabled
n
PIO Transfer
Standard
n
Mode:
Fast PIO 1
n
Fast PIO 2
n
Fast PIO 3
n
Fast PIO 4
n
DMA Transfer
Disabled
n
Mode:
Multiword DMA 1
n
Multiword DMA 2
n
Ultra DMA 0
n
Ultra DMA 1
n
Ultra DMA 2
n
Ultra DMA 3
n
Ultra DMA 4
n
Ultra DMA 5
n
C A U T I O N
A bootable CD-ROM may have a floppy disk format or
a hard drive format. When the bootable CD-ROM is
used, the drive allocations change automatically with-
out changing the BIOS setup. If a floppy disk format
CD-ROM is used, the CD-ROM becomes Drive A. The
CD-ROM will only take Drive C: (hard drive format) if
the internal hard drive is not present or is disabled. The
bootable CD-ROM can never use a C: designation if a
formatted internal hard drive is present, since the C:
designator is always reserved for the internal hard
drive.The boot sequence ignores the new drive designa-
tions, but your application software will use the new
designations.
Default
Description
–—
Displays the maximum capacity of the drive calculated from the
parameters of the hard disk when Hard Disk is selected.
[16 Sectors]
This option cannot be changed when Auto is selected. Specify the number
of sectors per block for multiple sector transfer. MAX refers to the size the
disk returns when required.
[Enabled]
Enables or disables logical Block Addressing in place of Cylinder, Head,
Sector addressing. This cannot be changed when Auto is selected.
[Fast PI0 4]
Selects the method for moving data to/from the drive. Autotype the drive
to select the optimum transfer mode. This option cannot be changed
when Auto is selected. Multi-word DMA is automatically set to mode 1 for
Fast PIO 1, Fast PIO 2, Fast PIO 3, and set to mode 2 for Fast PIO 4 /
DMA.
[Ultra DMA 5]
Selects the method for moving data to/from the drive. Autotype the drive
to select the optimum transfer mode. This option cannot be changed
when Auto is selected.
M a i n M e n u
C A U T I O N
Be careful of the operating environment when booting
from a CD-ROM or you may overwrite files by mistake.
7