Brother P-TOUCH CUBE PT-P300BT Podręcznik użytkownika - Strona 12

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Urządzenie do tworzenia etykiet Brother P-TOUCH CUBE PT-P300BT. Brother P-TOUCH CUBE PT-P300BT 18 stron. Tze tape
Również dla Brother P-TOUCH CUBE PT-P300BT: Podręcznik użytkownika (18 strony), Podręcznik użytkownika (18 strony), Podręcznik użytkownika (18 strony), Podręcznik użytkownika (18 strony), Podręcznik użytkownika (18 strony)

2. Installing Batteries or Connecting the AC Adapter

This label printer requires six (6) AAA alkaline batteries or six (6) fully-charged AAA Ni-MH

batteries, not included. As an alternative, use the AC Adapter included with this machine

and plug the label printer into an AC outlet.

1. Hold the label printer as shown in

the illustration. Open the Battery

Cover by pressing the mark on its

side (1) and pulling in the direction of

the arrow (2).

2. Insert six batteries following the

drawing marked inside the case.

Alternate positive and negative

poles, making sure to match the

negative battery end with the coil in

the battery slot.

3. Insert the two hooks at the rear of

the Battery Cover into the slots on

the label printer (3). Push the

Battery Cover closed (4), making

sure it locks into place.

The coils are

negative pole