Brother P-Touch E850TKW Podręcznik szybkiej konfiguracji - Strona 8
Przeglądaj online lub pobierz pdf Podręcznik szybkiej konfiguracji dla Urządzenie do tworzenia etykiet Brother P-Touch E850TKW. Brother P-Touch E850TKW 9 stron.
Cable Label Type
You can create various types of cable labels by selecting "Cable Label" in the
Home screen using the P-touch keyboard LCD unit or connecting your
P-touch to a computer and using Cable Label Tool.
The available cable label types are as follows:
NOTE
•
This section explains the various label types using the displayed
screens when you use the keyboard LCD unit.
•
For more information about cable label type, see the User's Guide.
Faceplate
Labels of this type can be used to identify various faceplates. Blocks of text
are evenly spaced on a single label.
Cable Wrap
Labels of this type can be wrapped around a cable or wire. The text is rotated
90° counterclockwise and printed.
NOTE
When using Flexible ID Tape:
•
We recommend using Flexible ID Tape for "Cable Wrap" labels.
•
Labels made with Flexible ID Tape are not designed for use as
electrical insulation.
•
When wrapping labels around
cylindrical objects, the diameter (1) of
the object should be at least 3 mm.
•
The overlapping (2) ends of the label
should be at least 5 mm.
Cable Flag
Labels of this type can be wrapped around a cable or wire, and both ends of
the label stick together to form a flag. The text on flag labels is printed on both
ends of the label, leaving a blank space in the middle that wraps around the
cable.
1
1
Flag length at least 5 mm
Horizontal
1
2
1
Flag length
2
Cable circumference
NOTE
•
You can enter up to two barcodes when
layout (only when using the P-touch keyboard).
•
We recommend using Flexible ID Tape for "Cable Flag" labels.
•
Labels made with Flexible ID Tape are not designed for use as
electrical insulation.
One block
Two blocks
1
Vertical
1
1
2
is selected in flag
Patch Panel
Labels of this type can be used to identify various types of panels.
Punch-Down Block
Labels of this type can be used to identify a type of electrical connection often
used in telephony. You can enter up to eight lines for each block on a single
label.
Die-cut Flag
Labels of this type can be printed on special die-cut flag labels to create flag
labels for cables and wires. Use the FLe label cassettes for this type.
2
Inverted Label (only when using the P-touch keyboard)
Labels of this type can be printed with the text and background colours
reversed without changing the tape cassette. In addition, you can create
labels with a small label height by setting "Orientation" to "Vertical".
ON
NOTE
•
The font and font style are set to Helsinki and bold respectively and
cannot be changed.
•
The following types of tape cannot be used:
- 3.5 mm tape
- Stencil tape
- Heat Shrink Tube
- Die-cut flag label
PVC Tube
Tubes of this type can be used to identify or insulate cables, or to protect them
from heat.
1
NOTE
When using the P-touch keyboard to create a tube, select "Create Tube"
in the Home screen.
Heat Shrink Tube (only when connecting to a computer)
Tubes of this type shrink by heat to fit a cable. Use the HSe tube cassettes
for this type.
1A-B01 1A-B02 1A-B03
Block length Block length Block length