Fujitsu Lifebook E-6557 Bios Manual - Strona 6
Przeglądaj online lub pobierz pdf Bios Manual dla Laptop Fujitsu Lifebook E-6557. Fujitsu Lifebook E-6557 38 stron. Fujitsu lifebook e6541: software guide
Drukuj stronę
L i f e B o o k E S e r i e s B I O S
Primary Master Submenu of the Main Menu
The Primary Master submenu identifies what ATA
devices are installed.
Main
Primary Master [FUJITSU MHH2064AT-(PM)]
Type:
Cylinders:
Heads:
Sectors:
Maximum Capacity:
Multi-Sector Transfers:
LBA Mode Control:
PIO Transfer Mode:
DMA Transfer Mode:
F1
Help
ESC
Exit
Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu
Menu Field
Options
Type:
Auto
None
CD-ROM
SuperDisk
Hard Disk
Cylinders:
A number
between 0
and 65,535
Heads:
A number
between 1
and 16
6
PhoenixBIOS Setup Utility
[Auto]
[13424]
[15]
[63]
12073MB
[16 Sectors]
[Enabled]
[Fast PIO 4]
[Ultra DMA 2]
Select Item
-/Space
Select Menu
Enter
Figure 2. Primary Master Submenu
Default
[Auto]
–—
–—
Item Specific Help
Select ATA/ATAPI drive
installed here.
[Auto]
The BIOS auto-types the
drive on boot time.
Except [Auto]
You enter parameters of
the drive.
[None]
The drive is disabled.
Change Values
F9
Select
Sub-Menu
F10
Description
Selects the ATA/ATAPI device type. Select Auto to have the type
automatically identified by the BIOS at POST. If None is selected, all
of the following Set-up items do not appear. Select CD-ROM if a
CD-ROM drive is installed at this connection. If User is selected,
you must specify the number of Cylinders, Heads, and Sectors for
the drive. Select ATAPI Removable if a removable disk drive is
installed at this connection.
This item appears only when Auto is selected and the type is
identified as hard disk, or User is selected. When User is selected,
you can change the value. This field is changed by incrementing
(pressing the [Spacebar]) or by typing in the number.
This item appears only when Auto is selected and the type is
identified as hard disk, or User is selected. When User is selected,
you can change the value. This field is changed by incrementing
(pressing the [Spacebar]) or by typing in the number.
Setup Defaults
Save and Exit