Fujitsu Lifebook E8010D Bios Manual - Strona 8

Przeglądaj online lub pobierz pdf Bios Manual dla Laptop Fujitsu Lifebook E8010D. Fujitsu Lifebook E8010D 30 stron. Lifebook e series

Drukuj stronę

L i f e B o o k E S e r i e s B I O S

Secondary Master Submenu of the Main Menu

The Secondary Master submenu allows you to configure secondary ATA devices.

Main

Type:

Multi-Sector Transfers:

LBA Mode Control:

Transfer Mode:

Ultra DMA Mode:

Help

ESC

Exit

Table 3: Fields, Options and Defaults for the Secondary Master Submenu of the Main Menu

Menu Field

Options

Type:

Auto

None

CD-ROM

Hard Disk

CHS Format

Cylinders:

A number between

0 and 65,535

Heads:

A number between

1 and 16

Sectors:

A number between

0 and 63

PhoenixBIOS Setup Utility

Secondary Master [UJDA750FDVD/CDRW-(SM)]

[Auto]

[Disabled]

[Standard]

[Disabled]

Select Item

Select Menu

Figure 3. Secondary Master Submenu

Default

[Auto]

–—

-/Space

Change Values

Enter

Select

Sub-Menu

Description

NOTE: The Type field does not appear as a drop-down menu. Tap

the spacebar to cycle through the selections.

Selects the ATA/ATAPI device type. Select Auto to have the type

automatically identified by the BIOS at POST. If None is selected, all

of the following setup items do not appear. Select CD-ROM or Hard

Disk for appropriate drive type installed at this connection.

Cylinders/Heads/Sectors

This item appears only when Hard Disk is selected as the type. This

field is changed by incrementing (pressing the [Spacebar]) or by typ-

ing in the number.

This item appears only when Hard Disk is selected as type. You can

change the value by incrementing (pressing the [Spacebar]) or by

typing in the number.

This item appears only when Hard Disk is selected as type. You can

change the value by incrementing (pressing the [Spacebar]) or by

typing in the number.

Item Specific Help

Select ATA/ATAPI drive

installed here.

[Auto]

The BIOS auto-types the

drive on boot time.

Except [Auto]

You enter parameters of

the drive.

[None]

The drive is disabled.

Setup Defaults

F10

Save and Exit