Fujitsu Lifebook E8020D Bios Manual - Strona 22

Przeglądaj online lub pobierz pdf Bios Manual dla Laptop Fujitsu Lifebook E8020D. Fujitsu Lifebook E8020D 29 stron. Fujitsu lifebook e series

Drukuj stronę
L i f e B o o k E S e r i e s B I O S

Hard Disk Security Submenu of the Security Menu

The Hard Disk Security submenu is for configuring hard disk security features.
Serial ATA Port 0 Password Is: Clear
Primary Master Password Is:
*Set Serial ATA Port 0 Password
Set Primary Master Password:
Password Entry on Boot:
*Hard Disk Password can not be set nor changed
if the system is rebooted from OS. Choose "Save
Changes and Power Off" in Exit Menu to shutdown
the system, then Hard Disk Password can be set
or changed on next boot.
F1
ESC
Table 14: Fields, Options and Defaults for the Hard Disk Security Submenu of the Security Menu
Menu Field
Options
Serial ATA Port 0
___
Password Is:
Primary Master
___
Password Is:
Set Serial ATA Port
___
0 Password:
Set Primary
___
Master Password:
■
Password Entry on
Disabled
Boot:
■
Enabled
22
Main
Advanced
Security
Hard Disk Security
Help
Select Item
Exit
Select Menu
Figure 14. Hard Disk Security Submenu
Default
Description
Clear
Display-only. Default is Clear. When the Primary Master Password has been set, the
field changes to Set. When this password is set, the primary hard disk drive cannot
be used in another system unless the password is entered.
Not
Display-only. Default is Not Available. When Secondary Master Password has been
Available
set, the field changes to Set. When this password is set, the secondary (modular)
hard disk drive cannot be used in another system unless the password is entered.
[Enter]
Sets, changes or cancels the Serial ATA Port 0 Password. The Serial ATA Port 0 Pass-
word may be up to seven characters long and must include only letters or numbers
(no symbols). Passwords are NOT case-sensitive. When a Serial ATA Port 0 Pass-
word is set, it must be used to access the hard drive if it is used in another system.
Note that the password will not take effect until the system has been rebooted.
Note that the hard disk password cannot be set or changed if the system is rebooted
from the OS. Choose "Save Changes and Power Off" in the Exit menu to shut
down the system, then the password can be set or changed on the next boot.
[Enter]
Sets, changes or cancels the Primary Master Password. The Primary Master Pass-
word may be up to seven characters long and must include only letters or numbers
(no symbols). Passwords are NOT case-sensitive. When a Primary Master Password
is set, it must be used to access the modular hard drive if it is used in another system.
Note that the password will not take effect until the system has been rebooted.
[Enabled]
When set to disabled, entry of a Hard Disk Password is not required before OS boot.
(The hard disk is still password-protected without password entry.)
PhoenixBIOS Setup Utility
Power Savings
Not Available
[Enter]
[Enter]
[Enabled]
-/Space
Change Values
Enter
Select
Sub-Menu
Exit
Item Specific Help
F9
Setup Defaults
F10
Save and Exit