Brother P-touch QL-1050N Podręcznik użytkownika - Strona 32

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Urządzenie do tworzenia etykiet Brother P-touch QL-1050N. Brother P-touch QL-1050N 41 stron. Quick setup guide (español) - english
Również dla Brother P-touch QL-1050N: Skrócona instrukcja obsługi (2 strony), Podręcznik użytkownika (42 strony), Instrukcja obsługi dla sieci (41 strony), Krótki przewodnik (2 strony), Skrócona instrukcja obsługi (2 strony), Podręcznik użytkownika (24 strony)

Appendix

Fonts and several bar codes are embedded within this machine. You can send commands to print embedded

characters and barcodes. (For QL-580N/QL-1050/QL-1060N only)

Commands available are P-touch proprietary commands based on ESC/P.

For details, see the "Command Reference" included in the CD-ROM.

([CD Drive]:\Doc\Technical)

The pin assignments for the serial cables (RS-232C cables) which can be used with this machine are shown

in the table below. You can purchase the cables at an electronics store. Do not use an interface cable that is

longer than 6 feet (2.0 meters).

Brother QL side

(D-sub female, lock screw #4-40 inch screw)

Signal

Name

Number

DCD

RXD

TXD

DTR

GND

DSR

RTS

CTS

•

It is not possible to connect RS-232C cable and USB cable to the printer at the same time and use it.

•

Connect only one cable which is used to communicate with the printer. (For QL-1050 only)

•

The RS-232C serial connector part of this equipment is not Limited Power Source.

Pin Assignments

Available Commands

PC side

(D-Sub9P female)

Signal

Number

Name

DCD

RXD

TXD

DTR

GND

DSR

RTS

CTS