Fujitsu LifeBook P5020D Bios Manual - Strona 5
Przeglądaj online lub pobierz pdf Bios Manual dla Laptop Fujitsu LifeBook P5020D. Fujitsu LifeBook P5020D 27 stron. Lifebook p series
Również dla Fujitsu LifeBook P5020D: Łatwa instrukcja obsługi (37 strony)
Drukuj stronę
Primary Master Submenu of the Main Menu
The Primary Master submenu identifies which ATA
devices are installed.
Main
Type:
Total Sectors:
Maximum Capacity:
Multi-Sector Transfers:
LBA Mode Control:
Transfer Mode:
Ultra DMA Mode:
F1
Help
ESC
Exit
Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu
Menu Field
Options
Type:
Auto
n
None
n
CD-ROM
n
Hard Disk
n
LBA Format
Total Sectors:
---
Maximum
---
Capacity:
CHS Format
Cylinders:
A number
n
between 0 and
65,535
PhoenixBIOS Setup Utility
Advanced
Security
Primary Master [HITACHI_DK23EA-40-(PM)]
[Auto]
LBA Format
78140160
40008MB
[16 Sectors]
[Enabled]
[Multiword DMA 2]
[Mode 5]
Select Item
-/Space
Select Menu
Enter
Figure 2. Primary Master Submenu
Default
Description
[Auto]
Selects the ATA/ATAPI device type. Select Auto to have the type automatically
identified by the BIOS at POST. If None is selected, all of the following Set-up
items do not appear. Select CD-ROM if a CD-ROM drive is installed at this
connection. If Hard Disk is selected, you must specify the number of Cylin-
ders, Heads, and Sectors for the drive.
Logical Block Addressing (LBA)
---
The total number of sectors on your hard disk
---
The maximum capacity of your hard disk
Cylinders/Heads/Sectors
–—
This item is active only when Hard Disk is selected as the type. This field is
changed by incrementing (pressing the [Spacebar]), by typing in the number,
or using the "+" and "-" keys.
Note: Actual hard drive label shown may vary. Depending
on the drive type, information such as cylinders, heads and
sectors may also be displayed.
Power
Boot
Info
Item Specific Help
Select ATA/ATAPI drive
installed here.
[Auto]
The BIOS auto-types the
drive on boot time.
Except [Auto]
You enter parameters of
the drive.
[None]
The drive is disabled.
Change Values
Select
Sub-Menu
M a i n M e n u
Exit
F9
Setup Defaults
F10
Save and Exit
5