AC Pro AWH36LB-D3DNA3G/O Podręcznik użytkownika - Strona 5

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Klimatyzator AC Pro AWH36LB-D3DNA3G/O. AC Pro AWH36LB-D3DNA3G/O 15 stron. S series
Również dla AC Pro AWH36LB-D3DNA3G/O: Podręcznik użytkownika (10 strony)

AC Pro AWH36LB-D3DNA3G/O Podręcznik użytkownika
7. SLEEP Button
Under COOL, HEAT or DRY mode, press this button to start up sleep function. "
Press this button again to cancel sleep function and "
8. TEMP Button
By pressing this button, you can see indoor set temperature, indoor ambient temperature or outdoor ambient temperature on
indoor unit's display. The setting on remote controller is selected circularly as below.
 When selecting "
" or no display with remote controller, temperature indicator on indoor unit displays set temperature.
 When selecting "
" with remote controller, temperature indicator on indoor unit displays indoor ambient temperature.
 When selecting "
" with remote controller, temperature indicator on indoor unit displays outdoor ambient temperature.
Note:
 Outdoor temperature display is not available for some models. At that time, indoor unit receives "
plays indoor set temperature.
 It's defaulted to display set temperature when turning on the unit. There is no display in the remote controller.
 Only for the models whose indoor unit has dual-8 display.
 When selecting displaying of indoor or outdoor ambient temperature, indoor temperature indicator displays corresponding
temperature and automatically turn to display set temperature after three or five seconds.
9. I FEEL Button
Press this button to start I FEEL function and "
mote controller will send the detected ambient temperature to the controller and the unit will automatically adjust the indoor
temperature according to the detected temperature. Press this button again to close I FEEL function and "
 Please put the remote controller near user when this function is set. Do not put the remote controller near the object of high
temperature or low temperature in order to avoid dtecting inaccuyrate ambient temperature.
10. LIGHT Button
Press this button to turn off display light on indoor unit. "
turn on display light. "
" icon is displayed.
11. Clock Button
Press this button to set clock time. "
time. Each presssing of "▲" or "▼", clock time will increase or decreast 1 minute.. If hold "▲" or "▼" button, 2s later, time will
change quickly. Release this button when reaching your required time. Press " CLOCK" button to confirm the time. "
stops blinking.
Note:
 Clock time adopts 24-hour mode
 The interval between two operation can't exceed 5s. Otherewise, remote controller will quit setting status. Operation for
TIMER ON/TIMER OFF is the same.
12. TIMER ON/ TIMER OFF Button
 TIMER ON button
"TIMER ON" button can set the time for timer on. After pressing this button. "
mote controller blinks. Press "▲" or "▼" button to adjust TIMER ON setting. After each pressing of "▲" or "▼" button, TIMER
ON setting will increase or decrease 1 min. Hold "▲" or "▼" button, 2s later, the time will change quickly until reaching your re-
quired time. Press " TIMER ON" to confirm it. The word "ON" will stop blinking. "
ON: Under the condition that TIMER ON is started up, press "TIMER ON" button to cancel it.
Note:
Under on and off status, you can set TIMER OFF or TIMER ON simultaneously.
 Before setting TIMER ON or TIMER OFF, please adjust the clock time.
 After starting up TIMER ON or TIMER OFF< set the constant circulating valid. After that, air conditioner will be turned on
or turned off according to setting time. ON/OFF button has no effect on settiong. If you dont need this function, please use
remote controller to cancel it.
" icon will disappear.
" will be displayed on the remote controller. After this function is set, the re-
" icon on remote controller disappears. Press this button again to
" icon on remote controller will blink. Press "▲" or "▼" button within 5s to set clock
" icon is displayed on remote controller.
" signal, while it dis-
" will disappear.
" icon disappears and the word "on" on re-
" icon resumes displaying. Cancel TIMER
" icon
3