AEG L 77480 FL Podręcznik użytkownika - Strona 10
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Spryskiwacz AEG L 77480 FL. AEG L 77480 FL 40 stron.
10
TIME SAVE BUTTON
Press the button
programme duration.
• Press one time to set 'Shortened du-
ration' for items with daily soil.
• Press two times to set 'Extra Quick'
for items with almost no soil.
Some programmes accept only
one of the two functions.
EXTRA RINSE BUTTON
Press button
to a programme.
Use this function for persons allergic to
detergents and in areas where the wa-
ter is soft.
STAIN BUTTON
Press button
to a programme.
Use this function for laundry with hard
stains to remove.
When you set this function, put the
stain remover into compartment
This function increases the pro-
gramme duration.
This function is not available
with a temperature lower than
40° C.
SPIN BUTTON
Press this button to:
• Decrease the maximum speed of the
spin phase when you set a pro-
gramme.
The display shows only the spin
speeds available with the set
programme.
• Deactivate the spin phase.
• Activate the 'Rinse Hold' function.
Set this function to prevent fabric
creases. The appliance does not
drain the water when the programme
is completed.
6
6
to decrease the
7
7
to add rinsing phases
8
to add the stain phase
8
9
TEMPERATURE BUTTON
Press button
temperature.
- -
= cold water
ACOUSTIC SIGNALS
FUNCTION
You can hear the acoustic signals when:
• You activate the appliance.
• You deactivate the appliance.
• You press the buttons.
• The programme is completed.
• The appliance has a malfunction.
To deactivate/activate the acoustic
signals, press button
at the same time for 6 seconds.
If you deactivate the acoustic
.
signals, they continue to oper-
ate only when you press the but-
tons and when a malfunction oc-
curs.
CHILD LOCK FUNCTION
This function prevents children operat-
ing the control panel.
• To activate the function, press button
and button
10
until the display shows the symbol
.
• To deactivate the function, press but-
ton
10
and button
time until the symbol
You can activate the function:
• Before you press button
pliance cannot start.
• After you press button
buttons and the programme knob
are deactivated.
Spin phase is off.
'Rinse Hold' function is
on.
10
to change the default
8
and button
at the same time
9
9
at the same
goes off.
: the ap-
4
, all the
4
10
7