AEG L 98699 FL Podręcznik użytkownika - Strona 12
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Spryskiwacz AEG L 98699 FL. AEG L 98699 FL 44 stron. Aeg washer user manual
Również dla AEG L 98699 FL: Podręcznik użytkownika (40 strony), Podręcznik użytkownika (40 strony), Podręcznik użytkownika (32 strony)
Drukuj stronę
12
1) Only available for Spin/Drain programme.
J
DAMPF BUTTON
Touch button
This is possible only with programmes
where the steam function is available.
The duration of the steam phase
changes accordingly to your selection.
MEMORY BUTTONS
Touch one of the buttons
rise a programme or to set a memo-
rised programme.
Memorise a programme
1. Press button
pliance.
2. Turn the programme knob (
your favourite programme.
3. If it is necessary, set one or more
functions.
4. Touch and hold one of the buttons
5
for some seconds. The buzzer
sounds and the display shows that
the programme is saved. .
Set a memorised programme
1. Touch the button where you mem-
orised the programme you want to
set.
2. The programme indicator comes
on and the display shows all the in-
formation.
To cancel a memorised pro-
gramme you can only memorise
a new programme.
START/PAUSE BUTTON
Touch button
programme.
Rinse hold
The default temperature of the programme.
Cold wash
4
to set the steam level.
4
5
5
to activate the ap-
1
6
to start or interrupt a
ZEITVORWAHL BUTTON
Touch button
programme from 30 minutes to 20
hours.
ZEITSPAREN BUTTON
Touch button
gramme time.
to memo-
You can select:
SHORTENED DURATION
To wash items with daily soil.
EXTRA QUICK
To wash quickly items with almost no
soil.
Some programmes accept only one of
these functions.
) to
2
EXTRA SPÜLEN BUTTON
Touch button
to a programme.
Use this function for persons allergic to
detergents and in areas where the wa-
ter is soft.
FLECKEN, VORWÄSCHE UND
EINWEICHEN BUTTON
Touch button
functions:
FLECKEN
Use this function for laundry with hard
stains to remove.
When you set this function, put the
6
stain remover into compartment
to delay the start of a
7
8
to decrease the pro-
to add rinsing phases
9
to set one of the these
10
The programme duration in-
creases.
This function is not available
with a temperature lower than
40° C.
7
8
9
10
.