Brother QL-580N Instrukcja konfiguracji i obsługi - Strona 37

Przeglądaj online lub pobierz pdf Instrukcja konfiguracji i obsługi dla Urządzenie do tworzenia etykiet Brother QL-580N. Brother QL-580N 43 stron. Label printer
Również dla Brother QL-580N: Instrukcja obsługi dla sieci (42 strony), Instrukcja obsługi oprogramowania (40 strony), Instrukcja obsługi dla sieci (48 strony), Instrukcja obsługi oprogramowania (48 strony), Podręcznik użytkownika (26 strony), Podręcznik użytkownika (40 strony), Podręcznik użytkownika (41 strony), Instrukcja konfiguracji i obsługi (43 strony)

Brother QL-580N Instrukcja konfiguracji i obsługi
4
Remove the backing paper
cleaning sheet into the printing unit until it reaches the area shown
by an arrow in the diagram below.
Insert the sheet without removing the
Check that the printing surface of cleaning sheet is facing upwards.
5
Close the DK Roll compartment cover and press the ON/OFF
button ( ) to turn the Brother QL-570/580N on.
6
Press the Feed button for more
than one second.
The roller spins by 10 cm.
The adhesive face of the cleaning sheet
removes the stain or
dust on the roller.
If you do not press the Feed button for
more than one second, the roller spins
only 8mm.
Dispose of the cleaning sheet after
use.
Label outlet maintenance
If a label causes the machine to jam
due to glue attached to the label outlet,
remove the power cord and clean the
label outlet with a cloth dipped into
ethanol or isopropyl alcohol.
and feed the edge
part of sheet.
Feed button
Label outlet
of the
STEP
STEP
STEP
STEP
35
1
2
3
4