Brother Stampcreator PRO SC2000USB Skrócona instrukcja obsługi - Strona 29
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Urządzenie do tworzenia etykiet Brother Stampcreator PRO SC2000USB. Brother Stampcreator PRO SC2000USB 36 stron.
If the stamp is faint or incomplete, use the ink bottle (sold separately) to refill the ink.
a Remove the grip from the stamp.
b Use the ink bottle to add five drops of ink to each refill hole in the
stamp.
☞ Be extremely careful when adding ink.
Do not use ink other than that specified, otherwise the stamp may
be damaged.
If too much ink is added, it may start leaking from the stamp's
surface. In that case, make a test stamp on scrap paper to remove
any excess ink.
c Put the grip back on the stamp.
☞ Immediately after refilling the ink, keep the stamp facing down
until the ink begins to flow from the stamp.
After refilling the ink, be sure to put the cap back on the ink refill
bottle.
26
Refilling the Stamp Ink
Grip
Ink bottle
Refill holes