Fujitsu FUTRO A300 Instrukcja obsługi - Strona 19
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Serwer Fujitsu FUTRO A300. Fujitsu FUTRO A300 29 stron. Futro a300
Drukuj stronę
Connecting the mouse
You can connect a USB mouse or a PS/2 mouse to your device.
Connecting,
Mouse,
Connecting a USB mouse
► Connect the USB mouse to one of the USB ports on the device.
USBport
USBport,
Connecting a PS/2 mouse
► Connect the PS/2 mouse to the PS/2 mouse port of the device.
Connecting,
PS/2mouse,
PS/2mouse,
Connecting the keyboard
You can connect a USB keyboard or a PS/2 keyboard to your device.
Connecting,
Keyboard,
Connecting a USB keyboard
Use the supplied keyboard cable only.
Connecting,
USBport,
► Plug the rectangular connector of the keyboard cable into the rectangular socket
on the underside or on the rear of the keyboard.
► Plug the flat rectangular USB connector of the keyboard cable into a USB port of the device.
USBport
Connecting a PS/2 keyboard
Use the supplied keyboard cable only.
Connecting,
ConnectingaPS/2keyboard
► Plug the rectangular connector of the keyboard cable into the rectangular socket
on the underside or on the rear of the keyboard.
► Plug the round plug of the keyboard cable into the PS/2 keyboard port on the device.
Keyboard,
Connecting external devices to the USB ports
Devices,
Externaldevices,
USBdevices,
USBport,
You can connect a wide range of external devices to the USB ports (e.g.
printer, scanner, modem or keyboard).
USB devices are hot-pluggable. This means you can connect and disconnect
USB cables while your device is switched on.
Additional information can be found in the documentation for the USB devices.
► Connect the data cable to the external device.
► Connect the data cable to one of the USB ports on your device.
Device drivers
The external USB devices you connect to the USB ports usually require no
driver of their own, as the required software is already included in the operating
system. However, if the external USB device requires its own software, please
install it from the data carrier provided with the USB device.
To ensure the transmission capacity of USB 2.0, the cable from the external USB
device to the USB port of your device must not be longer than 3 m.
Fujitsu Technology Solutions
Getting started
15