Fujitsu FUTRO S5010 Instrukcja obsługi - Strona 17

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Serwer Fujitsu FUTRO S5010. Fujitsu FUTRO S5010 36 stron.

Important notes

Energy saving, disposal and recycling

Disposal

Energysaving

Recycling

You can ﬁnd information on these subjects in the "Environment and Energy Information" manual

or on our website ("http://www.fujitsu.com/fts/about/fts/environment-care/").

Information on "Ecodesign directive":

Regulation 1275/2008, based on the EU Eco-design Directive (2009/125/EU),

deﬁnes requirements for the power consumption of electrical and electronic domestic

and ofﬁce devices in stand-by and off mode.

In general, all FUTRO thin client products have been developed for energy-efﬁcient operation and low

stand-by losses. Customer-speciﬁc requirements and requirements of the operating system, which

are a priority for optimal operation, can contradict the requirements of the above-mentioned regulation.

For administrative purposes, such as remote maintenance of systems, the "Wake-on-LAN" (WoL)

function is indispensable for our customers and is therefore a default setting. When the WoL

functions are active, the maximum permissible power draw can be exceeded slightly in OFF

mode. By deactivating the WoL function, it is possible to comply with the legal requirements.

Please see chapter

"Activating power-saving mode", Page 26

for the procedure.

The energy saving mode (ACPI S4 Save-to-disk), which is familiar from many current mobile

and desktop systems, is not available in the embedded operating systems for technical reasons.

Therefore, it is not possible to switch devices with this operating system automatically into Off mode.

The operating system of a thin client is stored on a ﬂash memory with optimised size and is provided

with write protection after conﬁguration has been completed by the customer. This prevents data

security from being put at risk through frequent writing to a ﬂash memory, such as when updating

the swapﬁles in the operating system or through other applications. Every ﬂash memory permits

only a limited number of write cycles. Both the activated write protection and the available limited

ﬂash memory capacity rule out the possibility of activating energy saving mode (ACPI S4).

Fujitsu