Fujitsu PRIMERGY 10/40GbE Podręcznik użytkownika - Strona 17

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Serwer Fujitsu PRIMERGY 10/40GbE. Fujitsu PRIMERGY 10/40GbE 23 stron. Connection blade 18/8+2

Drukuj stronę

4.3 EHM

Item
Switching method
Port information
ETHER port
Data transfer rate
Full/half duplex
MDI/MDI-X
Flow control
VLAN
Protocol VLAN
Predefined protocol
Link down relay
Link aggregation
Load balancing algorithm
Backup port
Port selection scheme
LLDP
Broadcast/Multicast storm control
Converged Enhance Ethernet
Output rate control
Reflective Relay
IGMP snooping
MLD snooping
IEEE802.1X authentication
RADIUS client
TACACS+ client
LDAP Client
IP interface
Password information
User name
Password
ACL information
SNMP information
DHCP/DNS client
telnet/SSH auto logoff
Console auto logoff
System log information
System log send
Facility
Priority
Automatically current time set
Schedule information
Host database information

5 Maximum Values

Default Setting
Cut through switching
1~18
19~26
(Downlink)
(Uplink)
10Gbps
10Gbps
Full-duplex
Full-duplex
(Fixed)
(Fixed)
－
Tx:OFF, Rx:ON
VID 1 (no tag)
IPv4、IPv6
Disabled
Destination MAC address, Source MAC address
Master port preferred
Disabled
Enabled
Threshold value : 7.5Mpps
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
In-band = None/OOB = DHCP
admin
admin
None
Disabled
Enabled on oob
5 min
8 hours
Disable
23（local7）
error、warn、info
TIME or SNTP protocol advertised by DHCP server
None
None
Page 17 / 23
PRIMERGY 10/40GbE Connection Blade 18/8+2 User Guide
27,31
(Uplink)
（MMB connection link）
40Gbps
10/100Mbps
(Auto-detect)
Full-duplex
Auto-detect
(Fixed)
－
Tx:ON(Fixed)
Rx:ON(Fixed)
－
oob