Fujitsu PRIMERGY BX600 Instrukcja obsługi - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Serwer Fujitsu PRIMERGY BX600. Fujitsu PRIMERGY BX600 13 stron.

Installing internal options

If internal options have been purchased separately, install them before installing the operating system.

In the following case, do not install internal options now.

- Custom Made Service

When installing internal options, perform operations after

reading the following manuals.

"BX600 S3 Blade Server System Unit

��

Hardware Guide Chapter 4 Installing

Options"

��

"Chapter 7 Installing Internal Options"

"PRIMERGY Server Books" / "Supplement"

��

n Available internal options and installation locations

��

After installing internal options, check that the order and place of installation are correct and that the connectors and cables

are correctly attached.

For details about server blade internal options, refer to the "User's Guide".

��

Install the non-system hard disk unit after the OS has

been installed. Installing the OS after the hard disk unit

has been installed may end in an error.

When installing a server blade with an installed Fibre

Channel Expansion Board in the chassis, install an

SFP module in the Fibre Channel connector of the cor-

responding FC Pass-Thru Blade or in the Fibre Channel

Pass Thru Blade SFP module slot.

��