Fujitsu PRIMERGY Econel 200 S2 Dodatkowa instrukcja serwisowa - Strona 25

Przeglądaj online lub pobierz pdf Dodatkowa instrukcja serwisowa dla Serwer Fujitsu PRIMERGY Econel 200 S2. Fujitsu PRIMERGY Econel 200 S2 39 stron.

Fujitsu PRIMERGY Econel 200 S2 Dodatkowa instrukcja serwisowa
Replacement routines
4.4

Replacing the temperature sensor

Part number: T26139-Y3850-V229
Ê Remove the side cover as described in section "Preparation" on page 17.
Figure 8: Removing the temperature sensor
Ê Release the temperature sensor from the cable clamp and remove the
connector from the operating panel cable (see circle).
Ê Connect the new temperature sensor to the operating panel cable, orient the
sensor towards the front of the server and secure it with the cable clamp.
Ê Close the server (for a detailed description see the Options Guide) and
connect the power plug.
Econel 200 S2
Replacing the temperature sensor
Service Supplement
25