Fujitsu PRIMERGY Econel 200 S2 Dodatkowa instrukcja serwisowa - Strona 32

Przeglądaj online lub pobierz pdf Dodatkowa instrukcja serwisowa dla Serwer Fujitsu PRIMERGY Econel 200 S2. Fujitsu PRIMERGY Econel 200 S2 39 stron.

Drukuj stronę
Fujitsu PRIMERGY Econel 200 S2 Dodatkowa instrukcja serwisowa
Replacing the system board
Figure 15: Removing the screws
Ê Remove the 6 screws from the system board.
Ê Lift the system board slightly using the marked socket of PCI slot 6 (see
arrow). In this way you lift the system board out of the centering ring of the
spacer bolt.
Ê Carefully remove the system board from the casing at a slight angle. This
allows you to pull the connectors out of the connector panel.
Ê Place the removed system board on an antistatic surface.
32
Service Supplement
Replacement routines
Econel 200 S2