Fujitsu PRIMERGY TX150 S6 Uwagi dotyczące używania - Strona 3

Przeglądaj online lub pobierz pdf Uwagi dotyczące używania dla Serwer Fujitsu PRIMERGY TX150 S6. Fujitsu PRIMERGY TX150 S6 8 stron.
Również dla Fujitsu PRIMERGY TX150 S6: Dodatkowa instrukcja serwisowa (45 strony)

Drukuj stronę
Fujitsu PRIMERGY TX150 S6 Uwagi dotyczące używania
Chapter 6 "6.2 Removing and Attaching Covers"
6.2.1 Removing Covers
■Attaching covers (Page 116)
Addition
Following caution notes are added for attaching the cover description.
Before attaching the covers, flip the front cover and make sure the position of the key lock part (Point A) is
proper position
settled at the
attaching the covers are required. It may cause a breakage failure if you attach the covers and lock the key
with wrong position.
Improper Position
Key lock part is unhooked (yellow circle).
All Rights Reserved, Copyright© FUJITSU LIMITED 2008
. If the key lock part is not at the
back side the front covers
Close-up of point A
3／8
proper position
, resetting the part before
Point Ａ
Proper Position
Key lock part is hooked.