Brother IntelliFax-2440C Podręcznik szybkiej konfiguracji - Strona 10

Przeglądaj online lub pobierz pdf Podręcznik szybkiej konfiguracji dla Faks Brother IntelliFax-2440C. Brother IntelliFax-2440C 16 stron. Brother fax-2440c: quick setup

Drukuj stronę

Setting Up the Machine

Print Quality Check

After the cleaning cycle is finished, the LCD

shows:

Set Paper and

Press Start

Make sure the paper is loaded in the paper

tray.

Press Colour Start.

The machine starts printing the PRINT

QUALITY CHECK SHEET (only during

initial ink cartridge installation).

Check the quality of the four colour blocks

formed by the short lines printed on the

sheet.

(BLACK/ CYAN/ YELLOW/ MAGENTA)

Print Quality Check

1. Check the quality of the four-color blocks formed by the short lines.

2. If all the short lines are clear and visible, the quality is acceptable. the quality is acceptable.

Select (Yes). If you can see missing short lines, select (No) to begin the color cleaning process

and follow the prompts on the LCD.

Avoid touching the printed surface

of the paper immediately after

printing, the surface may not be

completely dry and may stain your

fingers.

The LCD shows:

Is Quality OK?

1.Yes 2.No

If all lines are clear and visible, press 1 on

the dial pad to finish the quality check.

---OR---

If you can see missing short lines, press 2

on the dial pad and go to

The LCD asks you if the print quality is OK

for black and colour. Press 1 or 2 on the dial

pad.

Black OK?

1.Yes 2.No

After making your selection 1 (Yes) or 2 (No)

for both black and colour, the LCD shows:

Start Cleaning?

1.Yes 2.No

Press 1 (Yes), the machine will then start

cleaning the colours.

After cleaning is finished, press

Colour Start. The machine starts printing

the PRINT QUALITY CHECK SHEET again

and goes back to step

Poor