Fujitsu SPARC Enterprise M5000 Funkcje Podręcznik - Strona 15

Przeglądaj online lub pobierz pdf Funkcje Podręcznik dla Serwer Fujitsu SPARC Enterprise M5000. Fujitsu SPARC Enterprise M5000 30 stron. Rci build procedure
Również dla Fujitsu SPARC Enterprise M5000: Podręcznik uzupełniający (36 strony), Uwagi dotyczące produktu (44 strony), Podręcznik dla początkujących (4 strony)

Type of Usable COD Permits and XCP Version

TABLE 1

COD Permits

Can also be used on other servers

Server-specific

* The COD permits for the M4000/M5000 servers cannot be installed on the M8000/M9000 servers, and vice

versa.

† If you are using XCP 1100 or earlier, each COD permit is assigned to a server's individual Chassis HostID and

cannot be installed on other servers.

X: Not supported.

S: Supported.

To order COD Hardware Activation Options or COD boards, contact your sales

representative.

COD CPU Activation

When you purchase a COD Hardware Activation Option, Fujitsu sends you a COD

permit, which includes a COD key in the form of text lines. You install that key into

the COD database, which then allows you to activate the number of COD CPUs

specified in your order. The COD database is stored in nonvolatile memory on the

Service Processor. Servers with multiple Service Processors support COD database

failover.

Note – The XCP 1101 firmware release introduces support for unlocked COD keys,

which are not assigned to a server's individual Chassis HostID. The new type of

COD keys include the word "UNLOCKED."

Any old-style keys in your COD database will continue to work, even when new-

style keys are also present.

To display the COD activation log, which contains a record of additions and

deletions of COD permits, use the showcodactivationhistory(8) command. See

the showcodactivationhistory(8) man page.

XCP 1100 or Earlier

†

Capacity on Demand (COD) Administration

XCP 1101 or Later