Brother MFC MFC-465CN Podręcznik szybkiej konfiguracji - Strona 22
Przeglądaj online lub pobierz pdf Podręcznik szybkiej konfiguracji dla Faks Brother MFC MFC-465CN. Brother MFC MFC-465CN 38 stron. Brother multifunction printer quick setup guide
Również dla Brother MFC MFC-465CN: Podręcznik szybkiej konfiguracji (39 strony)
Drukuj stronę
STEP 2
Installing the Driver & Software
For Network Interface Users
2
(For Windows
XP Professional x64 Edition/Windows Vista™)
Important
Make sure that you have finished the
instructions from STEP 1 Setting Up the
Machine on pages 4 through 13.
Note
• Uninstall any other version of MFL-Pro Suite,any
scanning and faxing software and any printer
drivers as they might cause conflicts with new
software.
• The supplied CD-ROM includes ScanSoft™
PaperPort™ 11SE. This software supports
®
Windows
2000 (SP4 or greater), XP (SP2 or
greater), XP Professional x64 Edition and Windows
Vista™ only. Please update to the latest Windows
Service Pack before installing MFL-Pro Suite.
• Please close any applications running before
installing MFL-Pro Suite.
• Make sure there are no memory cards or a USB
Flash memory drive inserted into the media drives
or USB direct interface at the front of the machine.
1
Disconnect the machine from the power socket.
2
Using both hands, use the plastic tabs on both
sides of the machine to lift the scanner cover
until it locks securely into the open position.
3
Connect the network cable to the LAN socket
marked with a
LAN socket inside the machine on the left as
shown below.
20
®
2000 Professional/XP/
®
symbol. You will find the
4
Carefully guide the network cable into the
trench as shown below, following the trench
around and toward the back of the machine.
Then, connect the cable to your network.
Improper Setup
Make sure that the cable does not restrict the
cover from closing, or an error may occur.
Note
If both USB and LAN cables are being used, guide
both cables through the trench with one on top of
the other.
5
Lift the scanner cover to release the lock
Gently push the scanner cover support down
and close the scanner cover
6
Turn on the machine by connecting the power
cord.
®
Windows
.
.