Fujitsu fi-4110CU Series Instrukcje wymiany i czyszczenia materiałów eksploatacyjnych - Strona 10
Przeglądaj online lub pobierz pdf Instrukcje wymiany i czyszczenia materiałów eksploatacyjnych dla Skaner Fujitsu fi-4110CU Series. Fujitsu fi-4110CU Series 13 stron.
Drukuj stronę
fi-4110CU/M3091/M3092 S
10
C
R
ERIES
ONSUMABLE
EPLACEMENT AND
C
ADF
LEANING THE
Note:
The glass surface inside the fi-4110EOX2 ADF becomes hot during
scanner operation. Before performing this cleaning turn off the scanner
and disconnect the AC adapter from the power outlet, wait at least 15
minutes for the scanner to cool.
•
Turn Scanner power off.
•
Open the ADF cover by
pressing the ADF button.
Disconnect the AC power
plug. Let the scanner cool
for at least 15 minutes after
operation. This is to prevent
burns to your skin as the
lamps will heat the surface
of the glass in the feed path.
•
Use F1 Cleaner (90% or
higher Isopropyl Alcohol) on
a lint free cloth and clean the
areas shown in the drawing
to the right. (See following
steps to clean properly)
C
P
A
LEANING THE
AD
•
Clean the Pad Assembly
using a downward stroke in
the direction shown to the
right with the lint free cloth
moistened lightly with F1
Cleaner (90% or higher
Isopropyl Alcohol).
C
I
LEANING
NSTRUCTIONS
L
-F
C
WITH
INT
REE
LOTHS
Front of
Scanner
ADF
Pick Arm
Pick
spring
Feed Rollers (2)
Sheet Guide (white
part also on ADF
side).
.
SSEMBLY
Pick
Arm
Pick
Spring
ADF
button
Pad
Assy
Rollers (4)
Pick Roller
Eject Rollers
ADF Glass
Assy.
Clean the Rubber Portion
in Direction of Arrows
Plastic
(2)
Pad