Brother MFC-5460CN Podręcznik szybkiej konfiguracji - Strona 23
Przeglądaj online lub pobierz pdf Podręcznik szybkiej konfiguracji dla Faks Brother MFC-5460CN. Brother MFC-5460CN 34 stron. Mfc-5460cn; mfc-5860cn
Również dla Brother MFC-5460CN: Instrukcja konfiguracji (23 strony), Podręcznik szybkiej konfiguracji (34 strony), Instrukcja serwisowa (9 strony), Podręcznik szybkiej konfiguracji (21 strony)
Drukuj stronę
Installing the Driver & Software
16
If the machine is not yet configured for use on
your network, the following screen appears.
Click OK.
The Configure IP Address window will
appear. Enter an IP address for your machine
that is suitalbe for your network by following the
on-screen instruction.
17
When the Brother and ScanSoft On-Line
Registration screen is displayed, make your
selection and follow the on-screen instructions.
18
Click Finish to restart your computer.
®
(For Windows
2000 Professional/XP/XP
Professional x64 Edition, you must be logged
on with Administrator rights.)
Note
• After restarting the computer, the Installation
Diagnostics will run automatically. If the
installation is unsuccessful, the installation results
window will be shown. If the Diagnostics shows a
failure, please follow the on-screen instructions or
read the on-line help and FAQ's in
Start/All Programs (Programs)/Brother/MFC-X
XXX.
• Once you are sure that you can print after the
installation, restart your Firewall software.
• Firewall setting on your PC may reject the
necessary network connection for Network
Scanning and PC-Fax.
Follow the instructions below to configure your
Windows Firewall. If you are using a personal
Firewall software, see the User's Guide for your
software or contact the software manufacturer.
®
• For Windows
XP SP2 users:
1 Click the Start button, Control Panel and then
Windows Firewall.
Make sure that Windows Firewall on the
General tab is set to On.
2 Click the Advanced tab and Settings... button.
3 Click the Add button.
4 To add port 54925 for network scanning, enter
the information below:
1. (Any description)
2. Localhost
3. 54925
4. 54925
5. Select UDP
Then, click OK.
1
2
3
4
5 Click the Add button.
6 To add port 54926 for Network PC-Fax, enter
the information below:
1. (Any description)
2. Localhost
3. 54926
4. 54926
5. Select UDP
Then, click OK.
7 If you still have trouble with your network
connection, click the Add button.
8 To add port 137 for both network scanning and
Network PC-Fax receiving, enter the
information below:
1. (Any description)
2. Localhost
3. 137
4. 137
5. Select UDP
Then, click OK.
9 Make sure if the new setting is added and is
checked, and then click OK.
Windows
5
21
®