Fujitsu FI-5015C Pierwsze kroki - Strona 13
Przeglądaj online lub pobierz pdf Pierwsze kroki dla Skaner Fujitsu FI-5015C. Fujitsu FI-5015C 24 stron. Image scanner
Również dla Fujitsu FI-5015C: Pierwsze kroki (26 strony), Broszura i specyfikacje (2 strony), Instrukcje wymiany i czyszczenia materiałów eksploatacyjnych Instrukcje wymiany i czyszczenia materiałów eksploatacyjnych (10 strony)
Drukuj stronę
Your computer will restart and detect the scanner. Do
not remove the Setup DVD-ROM from the DVD drive
until your personal computer completely starts up again.
Depending on the operating system you
ATTENTION
are using, you may need to do the follow-
ing.
Windows 2000:
If you see the [Digital Signature not
Found] dialog box, click [Yes].
Windows Vista:
If you see the [Found New Hardware] dia-
log box, select [Locate and install driver
software], and then in the [User Account
Control] dialog box, click the [Continue]
button, if it is displayed.
■ Installing QuickScan Pro™(Trial)
TM
QuickScan Pro
is image capturing software based on
the ISIS standard. By using this software together with
ISIS, you can scan documents with the scanner. Follow
the procedure below to install the trial version of Quick-
TM
Scan Pro
that comes with this scanner.
Be sure to log on as a user with "Adminis-
ATTENTION
trator" privileges.
1. Insert the Setup DVD-ROM into the DVD drive.
⇒
<SETUP DISK STARTUP SCREEN> appears.
2. Click [INSTALL], and then click [QuickScan Pro
(Trial)].
3. In the [Welcome to the InstallShield Wizard for
QuickScan 4.7] dialog box, click the [Next] but-
ton.
4. Type in necessary information in the [Customer
Information] dialog box, and then click the
[Next] button.
"QuickScan Pro
ATTENTION
DVD-ROM is a trial version that can be
executed 30 times before it is disabled. If
you wish to continue using this product,
please consider purchasing full version.
(When you install the trial version, use the
displayed Serial Number.)
5. Install the application, following the on-screen
instructions.
Error Recovery Guide
Error Recovery Guide is a software that displays trou-
bleshooting information on screen if any scanner error
occurs.
If you did not install together the Error Recovery Guide
with the driver, please proceed with the procedures
given below for installing it.
1. Insert the Setup DVD-ROM into the DVD drive.
⇒
<SETUP DISK STARTUP SCREEN> appears.
2. Click [INSTALL].
3. Click [Error Recovery Guide] on the next
screen.
4. Select a language to use for the installation in
the <Choose Setup Language> window and
click [OK].
5. Install the application following the instructions
in the window.
6. When the [InstallShield Wizard Complete]
screen displays, click [Finish].
6
TM
" included in the Setup