Fujitsu FI-5530C2 Pierwsze kroki - Strona 20

Przeglądaj online lub pobierz pdf Pierwsze kroki dla Skaner Fujitsu FI-5530C2. Fujitsu FI-5530C2 28 stron. Image scanner
Również dla Fujitsu FI-5530C2: Podręcznik procedur instalacji (6 strony), Specyfikacje (2 strony), Podręcznik dla początkujących (27 strony), Podręcznik dla początkujących (11 strony), Instrukcje czyszczenia (2 strony), Instrukcje czyszczenia (2 strony), Pierwsze kroki (11 strony)

Drukuj stronę
Fujitsu FI-5530C2 Pierwsze kroki
9. In the [Scan Settings] dialog box, clear the
[Save to file] checkbox.
You only check the operation now, so you
HINT
do not have to save to file.
10. Click [Scanner Settings].
⇒
A setup dialog box appears for you to config-
ure scanner driver settings.
11. Configure scanner settings such as the resolu-
tion and paper size.
To use FUJITSU TWAIN 32
On the dialog box below, configure scan settings,
and then click the [OK] button.
12
To use FUJITSU ISIS
On the dialog box below, configure scanning set-
tings, and then click the [OK] button.
⇒
You are returned to the [Scan Settings] dialog
box.
12. Click the [Scan] button.
When you are using FUJITSU TWAIN 32,
HINT
you may see the TWAIN Driver setup dia-
log box again. If so, click the [Scan] button
on the dialog box.
⇒
The document is scanned and the scanned
image is displayed in the [ScandAll PRO]
window.
If the scanned document image is displayed in the win-
dow, it means that the scanner driver is installed prop-
erly.
For further information about how to scan documents,
refer to "fi-5530C2 Operator's Guide" contained in the
Setup CD-ROM.