Brother MFC-890 Podręcznik szybkiej konfiguracji - Strona 9
Przeglądaj online lub pobierz pdf Podręcznik szybkiej konfiguracji dla Faks Brother MFC-890. Brother MFC-890 35 stron. Brother multifunction printer quick setup guide
Również dla Brother MFC-890: Lista referencyjna części (24 strony)
Drukuj stronęColour Block Quality
6
and Alignment Check
1
After the cleaning cycle is finished, the LCD
shows;
SET PAPER AND
PRESS FAX START
2
Make sure the paper is loaded in the paper
tray.
Fax Start
Press the
3
The machine starts printing the PRINT
QUALITY CHECK SHEET (only during
initial ink cartridge installation).
Step A:Colour Block
Quality Check
1
The LCD shows:
IS STEP "A" OK?
1.YES 2.NO
Check the quality of the four colour blocks
printed on the sheet.
(BLACK/CYAN/YELLOW/MAGENTA)
2
If all lines are clear and visible, press the
key on the dial pad to go to STEP B
Alignment Check.
—
—
OR
If you can see missing short lines, press the
key on the dial pad and go to step 3.
OK
3
The LCD asks you if the print quality is OK
for each colour. Press the
on the dial pad.
BLACK OK?
1.YES 2.NO
key.
Check in Step A
Check in Step B
Poor
key or
key
When you have finished selecting the
key (
) or the
YES
colour, the LCD shows:
START CLEANING?
1.YES 2.NO
Press the
key (
starts cleaning the colours.
After cleaning is finished, press the
Fax Start
key. The machine starts printing
PRINT QUALITY CHECK SHEET again
and goes back to the first step of STEP A.
Step B:Alignment
Check
1
The LCD shows:
IS STEP "B" OK?
1.YES 2.NO
Check the 600 DPI and 1200 DPI test print
to see if No.5 most closely matches the OK
sample (No.0). Press the
matches it.
Do NOT select
1
If another test print number is a better match
for either 600 DPI or 1200 DPI, press the
key to select
and go to step 2.
NO
2
For 600 DPI, select the number from 1 to 8
that most closely matches the No.0 sample
and enter it using the dial pad.
600DPI ADJUST
SELECT BEST #
3
For 1200 DPI, enter the number from 1 to 8
that most closely matches the No.0 sample.
1200DPI ADJUST
SELECT BEST #
The Quality check is now complete.
key (
) for each
NO
), and then machine
YES
key if No.5
No.5
600 DPI
1200 DPI
7