Fujitsu FI-6240 Podręcznik dla początkujących - Strona 11

Przeglądaj online lub pobierz pdf Podręcznik dla początkujących dla Skaner Fujitsu FI-6240. Fujitsu FI-6240 20 stron. Image scanner
Również dla Fujitsu FI-6240: Podręcznik procedur instalacji (6 strony), Specyfikacje (2 strony), Instrukcja obsługi (10 strony), Pierwsze kroki (23 strony)

Fujitsu FI-6240 Podręcznik dla początkujących
5.
Click [INSTALL PRODUCTS], and then click
[TWAIN Driver].
6.
The Error Recovery Guide Installation dialog box
appears.
Error Recovery Guide is an application with which
you can view on-screen information for troubleshoot-
ing errors that may occur in the scanner. This guide
helps solve problems, so select [Yes] to install it. You
may also choose to install it later.
ATTENTION
After you select [Yes] for installing Error Recovery Guide, the
[Choose Setup Language] dialog box appears. Select a
language and follow the on-screen instructions. The Error
Recovery Guide dialog box is automatically displayed when
the installation is complete. Wait until the installation of the
TWAIN driver starts.
7.
Select a language for the installation on the
[Choose Setup Language] dialog box, and then
click the [Next] button.
8.
Install the driver, following the on-screen
instructions.
9.
When you see the [InstallShield Wizard Complete]
dialog box, click the [Finish] button.
The installation of FUJITSU TWAIN 32 is complete. Next,
install ScandAll PRO (
To make sure that FUJITSU TWAIN 32 is successfully
installed, perform a scan with a TWAIN-compliant
application such as ScandAll PRO. For information about
how to scan with ScandAll PRO, refer to section "2.4
Checking Scanner Driver Operation" on page 9.
FUJITSU ISIS is an ISIS-compliant scanner driver.
To use this scanner with any ISIS-compatible
application, install FUJITSU ISIS, following the procedure
below.
■ Preparation
Do the following before installing the driver:
For details on how to connect the scanner, refer to section
"2.2 Connecting the Scanner to Your PC" on page 3.
■ Installing the FUJITSU ISIS
Screenshots taken in Windows XP are used as examples.
The displayed windows and operations may slightly vary
depending on the operating system you are using.
1.
2.
Be sure to log on as a user with "Administrator" privileges.
fi-6140/fi-6240 Image Scanner Getting Started
ATTENTION
Depending on the state of the operating system, the
computer may shut down and restart. In this case, the
computer detects the scanner when it starts up. Do not
remove the Setup CD-ROM from the CD drive until the
computer completely starts up again.
Depending on the operating system you are using, you
may need to do the following.
Windows 2000:
If you see the [Digital Signature not Found] dialog box,
click the [Yes] button.
Windows Vista:
If you see the [Found New Hardware] dialog box, select
[Locate and install driver software], and then in the
[User Account Control] dialog box, click the [Continue]
button, if it is displayed.
page 7).
ATTENTION
For FUJITSU ISIS Scanner Driver
Unpack the Setup CD-ROM, but do not insert
the Setup CD-ROM into the CD drive yet.
Connect the scanner correctly to your computer.
HINT

Scanner Driver

HINT
Press the Power button to turn on the scanner.
Turn on your computer, and then log on to
Windows.
ATTENTION
6