Brother 1870N - HL B/W Laser Printer Podręcznik szybkiej konfiguracji - Strona 2
Przeglądaj online lub pobierz pdf Podręcznik szybkiej konfiguracji dla Serwer druku Brother 1870N - HL B/W Laser Printer. Brother 1870N - HL B/W Laser Printer 2 stron. Driver setup guide for mac - english
Również dla Brother 1870N - HL B/W Laser Printer: Instrukcja instalacji sterownika (2 strony)
Drukuj stronę
Network Quick Setup Guide
For HL-1850 users: If you are going to connect the printer to your network, purchase the optional Network board (NC-4100h).
If you are going to connect the printer to your network, we recommend that you contact your system administrator prior to
installation.
If you are an Administrator: Configure your network printer settings referring to the following instructions.
The default password for the print server is 'access'. You can use the BRAdmin Professional software or a web browser to change
this password.
Setting Your Language on the Control Panel
To change the language settings of the printer do the following.
SETUP
LANGUAGE
Back
READY
Data
Back
Set
Reprint
Set
Job cancel
Go
1
2
Press the + button until
Press the Set button
SETUP is displayed.
again.
Press the Set button.
Setting Your Printer IP Address and Subnet Mask
To set the printer IP address using the printer control panel do the following.
NETWORK
TCP / I P
Back
READY
Data
Back
Reprint
Set
Set
Job cancel
Go
1
2
Press the + button until
Press the Set button
NETWORK is displayed.
again.
Press the Set button.
TCP/IP ENABLE will
be displayed.
SUBNET MASK=
Back
Set
5
Press the + button until
SUBNET MASK= is displayed.
Press the Set button.
For more information, refer to the Network User's Guide on the supplied CD-ROM or go to http://solutions.brother.com
©2002 Brother Industries, Ltd. ©1998-2002 TROY XCD Inc. ©1983-1998 PACIFIC SOFTWORKS INC. ALL RIGHTS RESERVED
Windows and Windows NT are registered trademarks of Microsoft Corporation in the U.S. and other countries. HP, HP/UX, JetDirect and JetAdmin are trademarks of Hewllet-Packard Company. UNIX is a trademark
of UNIX Systems Laboratories. Adobe PostScript and PostScript3 are trademarks of Adobe Systems Incorporated. Netware is a trademark of Novell, Inc. Apple Macintosh, iMac, LaserWriter, and AppleTalk are
trademarks of Apple Computer, Inc.
All other brand and product names are trademarks or registereted trademarks of their respective holders.
=ENGL I SH
*
Back
Back
Set
Set
3
Scroll through the available languages by
pressing the + or - buttons. Press the Set
button to accept the appropriate language.
An asterisk mark (*) appears on the LCD.
(Using the Control Panel)
I P ADDRESS=
1 9
Back
Back
Set
Set
3
4
Press the + button until
Enter your IP address of the printer using
IP ADDRESS= is displayed.
the + and - buttons. Press the Set button
Press the Set button.
to go to next digit. Press the Set button to
complete the IP address.
An asterisk mark (*) appears on the LCD.
0
.
0 .
0 .
0
*
READY
Back
Set
6
7
Enter your subnet mask settings in the same
Press the Go button to put the printer
way that you entered the IP address.
back into its READY state.
An asterisk mark (*) appears on the LCD.
For the Administrator
Install the BRAdmin Professional Configuration utility
The BRAdmin Professional software is designed to manage your Brother network connected devices. For example, Brother network
ready printers and Brother network ready Multifunction devices can be managed using the BRAdmin Professional software. The
BRAdmin Professional software can also be used to manage devices from other manufacturers whose products support the SNMP
(Simple Network Management Protocol).
For more information on the BRAdmin Professional utility go to http://solutions.brother.com
READY
1
Insert the CD-ROM into your CD-ROM drive.
The opening screen will appear automatically.
Go
Follow the instructions on the screen.
Network User's Guide Chapter Map
To configure the print server refer to the Network User's Guide.
4
Press the Go button to put
the printer back into its
READY state.
Windows
®
95/98/Me
2
.
0 .
0 . 1 9 2
*
Windows NT
®
Back
Windows
®
2000/XP
Set
UNIX/Linux
Macintosh
®
OS2 Warp Server
LAN Server
Go
Print Configuration Page
To print a configuration page, use a fine ball point pen to hold down the
Network Test Button for less than 5 seconds.
Factory Default Setting
If you wish to reset the print server back to its default factory settings
(resetting all information such as the password and IP address information),
use a fine ball point pen to hold down the Network Test Button for more than 5
seconds.
(For Windows
®
Users Only)
2
Click the Install Software icon
on the Menu screen.
®
®
Windows
Macintosh
Peer-to-Peer
TCP/IP
NetBIOS
Brother Internet Print
TCP/IP
Netware
IPX/SPX
Peer-to-Peer
TCP/IP
NetBIOS
DLC/LLC
Brother Internet Print (NT
®
4.0 only)
TCP/IP
Netware
IPX/SPX
Peer-to-Peer
TCP/IP
NetBIOS
(Windows
®
2000 only)
DLC/LLC
IPP (Internet Printing Protocol)
TCP/IP
Brother Internet Print
TCP/IP
Netware
IPX/SPX
TCP/IP
AppleTalk
TCP/IP
TCP/IP
NetBIOS
3
Click "BRAdmin Professional."
Follow the instructions on the screen.
Chapter 3
Peer-to-Peer Printing
Chapter 4
NetBIOS Peer-to-Peer Printing
Chapter 5
How to Configure Internet Printing
Chapter 6
Novell Netware Printing
Chapter 2
TCP/IP Printing
Chapter 4
NetBIOS Peer-to-Peer Printing
Chapter 8
DLC Printing
Chapter 5
How to Configure Internet Printing
Chapter 6
Novell Netware Printing
Chapter 2
TCP/IP Printing
Chapter 4
NetBIOS Peer-to-Peer Printing
Chapter 8
DLC Printing
Chapter 2
TCP/IP Printing
Chapter 5
How to Configure Internet Printing
Chapter 6
Novell Netware Printing
Chapter 1
UNIX Printing
Chapter 7
Macintosh Printing
Chapter 7
Macintosh Printing
Chapter 2
TCP/IP Printing
Chapter 4
NetBIOS Peer-to-Peer Printing
Test Button