Fujitsu PA03420-B001 - fi 60F - Flatbed Scanner Pierwsze kroki - Strona 10
Przeglądaj online lub pobierz pdf Pierwsze kroki dla Skaner Fujitsu PA03420-B001 - fi 60F - Flatbed Scanner. Fujitsu PA03420-B001 - fi 60F - Flatbed Scanner 20 stron. Image scanner
Drukuj stronęChapter 2
2.1 Installing the Scanner
Application
Both the scanner driver and image capturing application
software (called "application" hereafter) must be
installed on your PC.
Two types of drivers are available for this scanner, a
FUJITSU TWAIN 32 Scanner Driver and a FUJITSU
ISIS Scanner Driver, as well as two software applica-
tions, ScandAll 21 and QuickScan Pro™, are provided
with this product. The following sections describe how
to install each driver and application.
Please install the scanner driver
ATTENTION
before connecting the scanner to your
PC.
If you connect the scanner before
installing the scanner driver, the scan-
ner will not operate correctly.
If you have connected the scanner
beforehand, the "Found New Hard-
ware Wizard" screen appears (this
screen might differ slightly according
to the used OS) . On this screen, click
the [Cancel] button to close the
Wizard screen and install the scanner
driver first.
For FUJITSU TWAIN32 Scanner Driver
■ Preparation
Confirm the following items before installing the appli-
cation.
• Remove the Setup CD-ROM from its package,
but do not insert the Setup CD-ROM into the
CD driver yet.
• Uninstall any older versions of FUJITSU
TWAIN 32 driver if already installed.
Uninstall [Scanner Utility for Microsoft
ATTENTION
Windows] from [Add/Remove Pro-
grams] of the control panel.
2
INSTALLATION OF THE SCANNER
■ Installing the FUJITSU TWAIN32
Scanner Driver
Windows XP screenshots are used in
this section as examples. The windows
HINT
and operations may slightly vary
depending on your OS.
1. Turn on your PC and log on to Windows.
When using Windows 2000 or Win-
ATTENTION
dows XP, log on as a user with
"Administrator" privileges (privileges
of the administrator of your PC).
2. Insert the Setup CD-ROM into the CD drive.
⇒
<SETUP DISK START UP SCREEN> appears.
This screen may not appear when the
ATTENTION
"Autoplay" setting of your PC is OFF.
In this case, run "Install.exe" in this
CD-ROM directly from the "Explorer"
or "My Computer".
3. Click [INSTALL PRODUCTS].