Fujitsu PA03420-B001 - fi 60F - Flatbed Scanner Pierwsze kroki - Strona 7
Przeglądaj online lub pobierz pdf Pierwsze kroki dla Skaner Fujitsu PA03420-B001 - fi 60F - Flatbed Scanner. Fujitsu PA03420-B001 - fi 60F - Flatbed Scanner 20 stron. Image scanner
Drukuj stronęUse this scanner only at the
indicated power voltage. Do not
connect to multiple-power strips.
Use this scanner only at the indicated
power voltage and current. Improper
power voltage and current might cause
fire or electric shock. Do not connect to
multiple-power strips.
Do not touch the AC cable with wet
hands.
Do not touch the power plug with wet
hands. Doing so might cause electric
shock.
Wipe any dust from the power plug.
Wipe off any dust from metal parts on the
power plug or metal fittings with a soft, dry
cloth. Accumulated dust might cause fire
or electric shock.
Do not install the device in locations
that has oil smoke, steam, humidity,
and dust.
Do not install the scanner in locations
subject to oil smoke, steam, humidity, and
dust. Doing so might cause a fire or
electric shock.
Turn the scanner OFF if it is
damaged.
If the scanner is damaged for any reason,
disconnect immediately the power plug in
order to turn out the scanner. Contact the
store where you purchased the scanner.
Do not put liquids inside the scanner.
Do not insert or drop metal objects in to the
scanner. Do not scan wet documents or
documents with paper clips or staples. Do
not splash or allow the scanner to get wet.
If foreign objects (water, small metal
objects, liquids, etc.) get inside the scanner,
disconnect immediately the power plug in
order to turn out the scanner. Then, contact
the store where you bought the scanner or
the Maintenance Service Center. Pay par-
ticular attention to this warning in house-
holds where there are small children.
Do not touch the inside of the
scanner unless necessary.
Do not use the scanner if there is a
strange odor.
AUTION
Do not install the scanner on
unstable surfaces.
Do not place heavy objects or stand
on top of the scanner.
Firmly insert the power plug.
fi-60F Image Scanner Getting Started
Do not take apart or modify the scanner.
The inside of the scanner contains high-
voltage components. Touching these
components might cause electric shock or
fire.
If you detect excessive heat coming from
the device or detect other problems such as
smoke, strange smells or noises,
disconnect immediately the power plug in
order to turn out the scanner. Make sure
that any smoke coming from it has stopped,
before contacting the store where you
bought the scanner or an authorized
FUJITSU scanner service provider.
Make sure that the scanner is installed on
a flat, level surface and that none of its
parts extend beyond the surface top, such
as a desk or table. Do not install the
scanner on unstable surfaces. Install the
scanner on a level surface that is free of
vibration to prevent it from falling.
Install the scanner on a strong surface that
will support the weight of the scanner and
other devices.
Do not place heavy objects on the scanner
or use the scanner's surface top to
perform other work. Improper installation
might cause injuries and equipment
failure.
Firmly insert the power plug as far it can
go into the power outlet.
v