Fujitsu S510M - ScanSnap - Document Scanner Podręcznik dla początkujących - Strona 23

Przeglądaj online lub pobierz pdf Podręcznik dla początkujących dla Skaner Fujitsu S510M - ScanSnap - Document Scanner. Fujitsu S510M - ScanSnap - Document Scanner 35 stron. Color image scanner
Również dla Fujitsu S510M - ScanSnap - Document Scanner: Procedury instalacji (3 strony), Specyfikacje (2 strony), Instrukcja szybkiej instalacji (2 strony), Podręcznik dla początkujących (24 strony), Instrukcje czyszczenia (2 strony), Instrukcje czyszczenia (2 strony)

3.3 Scanning with the Carrier Sheet

If you use the Carrier Sheet, you can scan large documents such as A3 and B4 size documents, and

documents ofirregular shapes such as clippings of newspaper.

Creating Facing Pages in One Image

■

Fold the document in half, scan it in duplex scanning mode, and then merge both front and back side

images to make a double-page spread image.

Here, as an example, this section explains how to scan an A3-size document.

If you are scanning an A3 document, it is not possible to load it onto the ScanSnap as it is. Fold the

document in half and scan it following the procedure below.

1. Spread the page to be scanned facing outwards and fold it in half from the center.

Fold it tightly and smooth out the crease so that the folded portion does not appear puffed.

2. Open the Carrier Sheet and place the folded document inside.

Align the fold with the right edge of the Carrier Sheet so

that the document fits into the Carrier Sheet at the upper

corner.

3. Load the Carrier Sheet onto the ScanSnap.

• Load the Carrier Sheet with the portion striped in

black and white as the leading edge as shown in the

right figure.

• Adjust the side guides to the width of the Carrier

Sheet to avoid skewing.

• When the Carrier Sheet is used for scanning,

continuous scanning is not possible. Scan one piece

or one sheet at one time.

ScanSnap S510M Getting Started

SCAN

POWER