Fujitsu ScanSnap iX1600 Instrukcje wymiany i czyszczenia materiałów eksploatacyjnych - Strona 19
Przeglądaj online lub pobierz pdf Instrukcje wymiany i czyszczenia materiałów eksploatacyjnych dla Skaner Fujitsu ScanSnap iX1600. Fujitsu ScanSnap iX1600 22 stron.
Drukuj stronę
(3) Close the Guide-P-ASSY (sheet guide).
ATTENTION
Confirm that the pick rollers are attached properly. Otherwise, paper jams or other feeding errors may occur.
Make sure you insert the pick rollers until they lock in place.
Notice
Make sure that both ends of the Guide-P-ASSY (sheet guide) are locked firmly.
(4) Close the ADF top section.
Be careful not to get your fingers caught when closing the ADF.
Resetting the Number of Consumable Usage for iX1600
After replacing the consumables, reset the number of consumable usage in the following procedure.
(1) Tap
in the home screen on the touch panel of the ScanSnap to display the [Settings] screen.
(2) Tap
to display the [Maintenance] screen.
(3) Tap [Check consumable status] to display the [Check consumable status] window.
(4) Tap [Reset].
(5) When the message appears, tap [OK].
The value for [Current Count / Replacement Cycle] becomes [0].