Fujitsu SP-1130 Instrukcje wymiany i czyszczenia materiałów eksploatacyjnych - Strona 6

Przeglądaj online lub pobierz pdf Instrukcje wymiany i czyszczenia materiałów eksploatacyjnych dla Skaner Fujitsu SP-1130. Fujitsu SP-1130 18 stron.

SP1120\1125\1130 Consumable Replacement and Cleaning

Attach a new pick roller from the bottom.

a. Check the direction of the notch on the pick roller and of the small roller, and insert it in the hole.

b. Close the sheet guide.

ATTENTION

Check that the pick roller is installed properly. Otherwise, it may cause feeding errors such as paper jams.

Close the ADF.

CAUTION

Be careful not to have your fingers caught when the ADF closes.

10.

Reset the roller set counter.

Start the Software Operation Panel and reset the counter.

CG00002-291501

Instructions

Notch

Small Roller