AEG LTN7E273C Podręcznik użytkownika - Strona 23
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Spryskiwacz AEG LTN7E273C. AEG LTN7E273C 40 stron.
Drukuj stronę
11.7 Cycle time recalculation
After approximately 15
minutes from the start of the
programme:
• The appliance adjusts
automatically the cycle
time to the laundry you
have put in the drum to
have perfect washing
results in the minimum
necessary time.
• The display shows the
new time value.
11.8 Starting a programme
with the delay start
1. Press button Odložený start again
and again until the display shows the
number of minutes or hours of delay.
The related indicator comes on.
2. Press button Start/Pauza.
The appliance starts the countdown of
the delay start.
When the countdown is completed, the
programme starts automatically.
Before you press button
Start/Pauza to start the
appliance, you can cancel or
change the set of the delay
start.
11.9 Cancelling the delay
start
To cancel the delay start:
1. Press button Start/Pauza to set the
appliance to pause.
The related indicator flashes.
2. Press button Odložený start
repeatedly until the display shows .
3. Press button Start/Pauza again to
start the programme immediately.
11.10 Interrupting a
programme and changing a
option
You can change only some options
before they operate.
1. Press button Start/Pauza.
The related indicator flashes.
2. Change the option set.
3. Press the button Start/Pauza again.
The programme continues.
11.11 Cancelling a running
programme
1. Press button On/Off to cancel the
programme and to deactivate the
appliance.
2. Press button On/Off again to activate
the appliance.
Now, you can set a new washing
programme.
Before starting the new
programme the appliance
could drain the water. In this
case, make sure that the
detergent is still in the
detergent compartment, if
not fill the detergent again.
11.12 The ProSense load
detection
The programme duration in
the display is referred to a
medium/high load.
After touching the Start/Pauza button,
the maximum declared load indicator
goes off, the indicator
ProSense starts the laundry load
detection:
1. The appliance detects the load in the
first 30 seconds: the indicator
the time dots flash, the drum rotates
shortly.
2. At the end of the load detection, the
indicator
goes off and the time
dots stop flashing. The programme
duration will be adjusted accordingly
and could increase or decrease. After
further 30 seconds, the water filling
starts.
At the end of the load detection, in case
of drum overload, the indicator
flashing in the display:
In this case, for 30 seconds, it is possible
to pause the appliance and remove the
exceeding garments.
ENGLISH
23
flashes, the
and
is